Jump to content
SAU Community

Recommended Posts

i was going to do that but i get a little nervous about paying for shit online without physically speaking to someone. I made it clear to the chick at the florist i'd be ropable if the flowers didn't get there in time lol.

$100 for a big f*ck off bunch of flowers and a note. Let's hope it's actually a good amount of flowers not like 3..

that's what Coz said from Conceptz. he said give it 500 miles then contact him again. I also asked him to contact the supplier for me, he's usually very helpful so i'll leave it for him to do for me. Is it possible the system wasn't bled correctly or something? there's brand new clutch fluid in there. I'm just trying to account for everything and narrow down to what the issue could be. Fingers crossed it's not a faulty clutch, Coz has never heard of this sound coming from the southbend clutch/flywheel setup. I guess time will tell!

Ok so bit of an update on this issue i'm having-

Took the car back to Leon and got it back on the hoist. Got in it and went through the gears whilst i was in the air, went through all the gears and started hearing a fair bit of rattle once the car got under more load. 40km/h in 6th gear the noise was horrible, coming straight from inside the gearbox.

Leon says to give it a few hundred more km's and if nothing changes i need to speak to Coz about it. We pulled a bit of gear oil out looking for steel shavings, put a magnet in the small amount of oil we dropped and pulled out next to nothing. Probably the little bits were from the new synchro's meshing together.

Apparently, Leon has had plenty of cars up on the hoist doing the same thing as what we did going through the gears troubleshooting listening for noises and has never heard this happening before.

I guess i will drive it for a few hundred more km's, then change out the oil ($120 down the drain) for a thicker mix. Amsoil is very light, maybe the car doesn't like it. Then go from there, Leon thinks it's a gearbox bearing. We'll see!

Also i have a 12 month 12,000 mile warranty on the gearbox, i spoke to Coz this morning and he strongly thinks it's not the gearbox.. wtf can it be!?

Sounds a bit bearing related. Was the gearbox straight out of a wrecked V35 or something along those lines or rebuilt etc?

If it performs without issues and came out of a wrecked car without being touched then its a bit interesting. If it has been rebuilt etc then it could very well be something failing if the person who rebuilt it has done something wrong.

Synchro rings are usually made out of brass so if the metal had a gold look to it then thats probably all it is and like you said probably just normal wear in.

So went for a bit of a drive out to the harbour today because I thought I'd finally get off my ass and get back into photography. Some say wet weather is Sh.it but I really like taking photos in weather like this. Got Gifted a model at the harbour to :)

8484087189_0ee8865973_c.jpg
IMG_3886 by 89CAL, on Flickr

And tried some long exposure photos to get the water crashing on the rocks looking cool, but I dont have enough dark filters to make it work with the amount of light that was still out. But oh well you get the idea:

8484085485_ce8ecee213_c.jpg
IMG_3917 by 89CAL, on Flickr

Cal, gearbox is a brand spanker CD009 (From the 06-07 v35/350z's) straight from Conceptz performance in the US which originally came direct from Nissan.. Coz thinks it's very very unlikely it's the gearbox. I'm gonna drive it for a few hundred more km's and hope it goes away, if not i'll change out the gear oil for genuine Nissan stuff hopefully it does something for it.

Nice shots too by the way, that's a massive ship..

Ahh ok. yeah shouldnt be a box issue then. Who recommended the Amsoil?

Can you pull the boot for the clutch fork aside and feel around inside the bellhousing for some bits of clutch (wether its major bits, which I think is unlikely, or just some dust from the clutch)

Seems a bit odd for a new box

yep already done that, Leon pulled it off and had a look inside everything seems fine. I wonder if it's a combination of the clutch breaking in and the wrong gear oil maybe? Well alot of the guys in the US spoke very highly of Amsoil and reckoned it was great on these cars but Leon says it's too thin and not very good..

Very odd indeed lol.

I'd go a different oil man. Have you talked to the V35 guys on here to see what oil they use?

I've used Castrol with no issues, even used ATF for fun (because it was free) and that even wasnt all that bad. But the Redline shockproof so far is very good. I shouldnt have to use it because I've rebuilt the box, but I think the box has an issue with one of the gear sets because I still have alot of play in 5th on and off throttle.

Anyway. I wouldnt expect the oil to be causing that much drama but worth a try I guess

yeah they all say the same thing, i can't work out why so many people would say Amsoil is the shit then it turns out it just is shit..

By the way, where can i source genuine nissan mt fluid from? I've spoken to nissan in town, they have nothing that can help me. Spoke to Moorooka nissan down brissy way and they said nissan only sells it in a 20L drum which is $200. i don't really want to spend that much just on gear oil but if i can't get the genuine stuff any other way it probably wouldn't be a half bad idea..

haha nevermind just found a killer deal on eBay for exactly what i need from OCinfiniti in the US. $8.95 per quart and i only need 4. Cheapest gear oil i've ever seen!

http://www.ebay.com.au/itm/271104958963?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648

Edited by Seano350GT

$21 shipping?

Not sure, waiting for supplied to inbox me with a total cost shipped i'd imagine it will be cheap though.

Why do you want genuine Nissan Oil?

Supposedly it's the best stuff to use. Did a bit of reading turns out people have issues when you use non genuine gear oil, not sure why but it's cheap so i'll give it a go when i reach 500km driven on the new box.

bit quiet in here! anyone else heading to TNT on Friday night? Will more than likely give my car a run, just a little suss on this clutch issue. Hopefully i get my gear oil before then and i can change it over and see if it fixes anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...