Jump to content
SAU Community

Recommended Posts

So i decided to get the bumper done by North Coast Customs. $500 they're fixing bumper respraying it and they're touching up parts around the car that aren't perfect and they are also replacing my bonnet hinges (for some reason it's a common problem with my car - after x amount of time they bend and cause the bonnet to rub against the fender) then they're touching up the bonnet where it rubs now. Was going to buy a whole new bumper but i could literally find 1 for sale and it was in America..

Car is also getting inspected right now for a RWC hopefully the list is small.. got a fair idea what needs doing.

Anyway, anyone going to KSOS tonight?

Edited by Seano350GT

Cal i don't want to sell it at all man.. driving it this morning to work i was like ahhhh i'm gonna miss this thing. If only i had a garage, i would keep it.

Car passed RWC with flying colours yesterday, not 1 thing had to be fixed. I'm pretty stoked with that.

Cal i don't want to sell it at all man.. driving it this morning to work i was like ahhhh i'm gonna miss this thing. If only i had a garage, i would keep it.

Car passed RWC with flying colours yesterday, not 1 thing had to be fixed. I'm pretty stoked with that.

Not a real import.

Hey guys, here's the link to my for sale ad. http://www.boostclassifieds.com.au/advert/2212082-2003-Nissan-Skyline-V35-350gt-for-Sale.html

If you know anyone that's interested please pass on the link. I am willing to give a generous spotters fee if you help with the sale too. Also got a brand new set of BC BR coils to suit 350z/v35 if u know anyone that owns a Z let em know for me too ;)

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...