Jump to content
SAU Community

Recommended Posts

Hey

I'm going on a short holiday soon to Japan.

I want to visit some car part shops to buy a few things but I am struggling to find any info on the net. I know there are going to be a heap over there but I want to make sure they are close by and easy to find from where I am staying.

So, does anyone have any links for car part shops? Looking at buying my turbo's, cams, injectors and some other things. I am specifically after HKS and Nismo items.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/140214-car-parts-shops-in-japan/
Share on other sites

Autobacs is your friend. its like a Bunnings Warehouse for cars

Aisles of air fresheners

Aisles of wheels

Aisles of air suspension

Aisles of mobile phone holders

Aisles of turbos

Aisles of everything.

im hopefully going over next year

They are starting to open up a few secondhand Autobacs Stores. selling nothing but secondhand car parts and performance bits, wheels, suspension, etc, would be interesting to see.

Akihabara--are there any tuner shops there? It seems like a lot of the ones I've seen in Tokyo are fairly scattered about. More or less, you'll just be walking down a busy street and you'll see a smaller tuner shop with a bunch of tuner cars in front.

In terms of finding everything in one place, Autobacs is good but Super Autobacs is even better. I think there are a fair number of them in the Tokyo area, although I don't know the exact locations--try their website or the internet.

Otherwise, a good thing I've always done in the past, especially if you're looking for parts for a certain car, is to go to a specialist tuner shop so they'll know exactly what you're looking for. I've found a lot of these places are listed in the Hyper Rev magazines that come out periodically for certain types of vehicles (they should have tons of issues for the Skyline).

Good luck!

Autobacs is your friend. its like a Bunnings Warehouse for cars

Aisles of air fresheners

Aisles of wheels

Aisles of air suspension

Aisles of mobile phone holders

Aisles of turbos

Aisles of everything.

im hopefully going over next year

They are starting to open up a few secondhand Autobacs Stores. selling nothing but secondhand car parts and performance bits, wheels, suspension, etc, would be interesting to see.

Not having a dig, but have you even been to an Autobacs? They are nothing like you mentioned above.

Extremely limited range, very small amounts of real performance parts and ultra expensive prices.

[200]: Keep in mind that you will most likely have to order the majority of the parts on your list as even the good parts shops often wont have everything you need in stock ready to go.

If you can head to Chiba, there is a new parts store close by called Crystal that I rate as the best in Japan for both range and prices, and if you need anything they dont have in stock, they are more than happy to order it for you.

Top Secret is also down the road and there is a decent Up Garage close by as well.

Autobacs "performance" aisles... yeah thats a joke. The "performance" parts are usually a couple of short aisles of STi stickers with an intercooler or two on display mostly for current models which are of no interest to skyline people.

Upstairs at Tokyo bay Autobacs sells some nice hotdogs and some kinda ok back issues of popular magazines like GT-R magazine. As well as a small collection of overpriced dealership catalog/brochures which is of some interest but I think I bought them out of GTR stuff a couple years back.

I would avoid autobacs really - or visit Tokyo Bay or Chiba Naganuma at the very most unless you love wandering down countless aisles of Hello Kitty air freshners and pink seat covers for your Toyota Hiace SuperComfort 4x4 turbo deluxe.

If you can head to Chiba, there is a new parts store close by called Crystal that I rate as the best in Japan for both range and prices, and if you need anything they dont have in stock, they are more than happy to order it for you.

is crystal only in chiba or all over japan?

  • 2 weeks later...

what they said about autobacs is correct... but if you want a cool cup holder then by all means got to one...

upgarage has the best prices on parts... used ofcourse but still good.. there pretty descent for wheels...

anything you want new u can order from a shop it will only take a day or two to arrive so thats not to bad...

  • 1 year later...
  • 3 years later...

Guys Has anyone got any updates as i'm going in 2 months and of course i'd like to come back with a bunch of goodies.

I'm flying into Tokyo and will also be around Osaka at some point, i do have some time and money to spend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...