Jump to content
SAU Community

Recommended Posts

out of the cheapies the HSDs are the best but still far from good coilovers.

i would be goin the whiteline/bilstein group buy though. for an extra $150 or so you can get the bilsteins and swaybars, compared to just HSD coilovers.

Edited by salad
bilsteins to expensive d2 are $1320 off my mate same price as HSD or $1720 for tein

Are the aussie teins justas good as jap ones as i remember someone saying they are different for our conditions?

The aussie Tein Super Street's have been revalved and spring rates have been changed. They do feel very good and compliant on the road, adjusted towards the firmer settings is good for track. I run them in mine and my car is very competitive on track.

well G4 cost $1250 group buy

d2 & Ksport 1300 - 1400

hsd $1599 for the HRs

tein $1700

or u can go the for sydneykids suspension setup

id personally save up for the teins or other well known jap brand coilovers as they are the most important part of the cars setup esp for drift

Edited by R32 Driver

I did this for a magazine article some time ago, the editor hated it because it showed a lot of his advertisers in a bad light. The idea was to take a $1600 coil over kit (not for a Skyline) and break its retail price content down to show what you get for $400 each. Then compare it to a Bilstein, Koni, Whiteline, Kings, combination for $400 per corner

Coil over kit retail price breakdown;

Strut top $60

Bump stop $15

Dust cover $8

Upper spring seat $20

Lower spring seat $15

Threaded sleave/case $30

Spring $80

Shock $172

Total $400

Bilstein, Koni, Whiteline, Kings;

Bump stop $15

Dust cover $8

Spring $80

Shock $297

Total $400

It's easy to see that you get a 75% superior shock value ($172 compared to $297). The cost in a shock is the type of materials used (fairly minor difference) and the valving sophistication (where the real money is spent).

For what you get, Bilsteins are the best value for money.

>_< cheers :happy:

Hmmm

I have been running D2 coilovers in my R33 for over a year now. I have yet to have a problem with. My mate which also has an r33 has been running d2 for about 6months+ also without a problem

I personal thing for the price (i pay $1400 Installed) you cant go wrong...

ohh and i've used my car for a few drift days and found the coilovers to be fine...

i guess somepeople have luck with them and others dont

' date='7 Nov 2006, 03:36 AM' post='2647174']

Hmmm

I have been running D2 coilovers in my R33 for over a year now. I have yet to have a problem with. My mate which also has an r33 has been running d2 for about 6months+ also without a problem

I personal thing for the price (i pay $1400 Installed) you cant go wrong...

ohh and i've used my car for a few drift days and found the coilovers to be fine...

i guess somepeople have luck with them and others dont

i ran d2's on my s13 when they first came out in north america. I ran them for a total of 20000km in 1 summer, just commuting from toronto to the lakes, bout 600km per trip. I blew the rears out, the fronts clunked and squeeked, the springs rusted. Utter crap.

You can buy a blown set here for under $400.

That being said, they are re-buildable, A friend of mine replaces the springs with QA1 springs, and have the dampeners rebuilt and nobody has had a problem with the rebuilt ones.

For the price of a new set 1200cad now, megan racing makes a better coilover for the same price...i've been told Megan is your BC coilovers.

back to the teins.... the aussies superstreet how do tehy go?

I have aussie super street on my R33 GTS-T S2. They are very comfortable on soft setting for the street. When it goes out on the track i set it firmer (I also have the EDFC) and it is very good. i am consistently 1st or 2nd against other cars with more horsepower. It also depends on what you want to do. If your planning on drifting, Aussie Super Streets are probably not your best option.

If your after a good and reputable brand of suspension you cant go past Tein. I have seen D2's mountings break whilst drifting seals leak etc and in general they are pretty looking cheap Chinese/Taiwanese product mass produced on a small budget for a big gain.

Why not spend the little extra and get a good quality set of Teins. If your interested PM me for a good price!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...