Jump to content
SAU Community

Recommended Posts

  • Replies 147
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

lol, bman you are in a dangerous place right now. taking relationship advice from Mark may not be good for your health... :cheers:

get stuffed

my advice is perfectly sound

take it from a man with experience

ive been single for 24 years!

  • 2 months later...

Nearly there now - maybe a week to go. ! yay

Engine is completely rebuilt - fully dowled - and back in the car

Injectors are in

Fuel pump is in

Turbo manifold and pipe work is currently being manufactured

I'm getting excited again !

20B-build.jpg

Ha ha - Yeah , Yeah - that quote was before I decided to go the whole hog with the engine rebuild. (ie just the go fast bits bolted on)

I'm used to it ! Good work takes time !

My cars seem to like workshops :) :) ;)

Not long to go now !

Adrian - where's the best place to get the Auto tricked ? It's a Jatco ! Same as the 300ZX box - Will go for manualised auto with 3000 RPM stally -

Do you reckon I should go a transbrake as well ???? :)

Ordinarily I'd say Steve Butchard from BMS as he makes fully manualised, normal (forward) pattern, NO ELECTRONICS modifications to JATCO's. He makes a transbraked valvebody for them that is the shiznit.

I don't know how seriously you're going to want to drag race the car so unless you plan on putting slicks on it and turning into a rotary drag nut, I wouldn't bother with the transbrake.

You should make a call to MV Automatics in S.A. and speak to him about the manual valvebody he does for the JATCO's. If it's the 300ZX box, it's an RE403A. Exactly the same valvebody as a Skyline RE401A and in fact, most of the parts are interchangeable. (403 will handle more torque than a Skyline/WRX 401A but the larger components absorb more power. A reasonable trade-off in the circumstances.)

If Mike at MV can build you a box that is:

A/ Completely manualised

B/ Fitted out with tough steels, bands, clutches, etc

C/ Refurbished and re-bearinged (is that even a word?)

D/ Equipped with a converter of his manufacture

...then I'd say go with him for the box. He certainly knows his shit when it comes to JATCO's and although there isn't a transbrake option with his modified valvebody (i don't believe anyway) and the over drive (4th) gear will be a function of an electronic switch (possibly like it is now) it is almost certainly the best way to go about strengthening your box to handle what you're about to feed it.

Cheers,

Adrian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...