Jump to content
SAU Community

Recommended Posts

i bought my R33 (96 gts-t S2) from an auction, therefore i was unable to drive it before purchase, probably a big mistake but its done...

anyway got it registed yesterday and having been giving it a bit of a thrash, whenever i hit a bump in the road (even potholes) the tail swings (little bit left then right), it swings more between 60-90km after that it is less noticalble. I drove it in the wet today, it swings a little more. never driven a turbo in the wet, was an experience (still in 1 piece). Why is this happening, is it normal? the tyres are in good shape

Another problem i have is most times between 5-6000rpm my exhaust makes a popping noise (3 quick pops)

sorta sounds like backfiring but not very loud?

Lastly, im pretty sure the ECU has been modified as my car does not cut out a 180, could this be related to the other problems. so im thinking i need to take her in for a tuning, anyone know of some good places in brissy?

cheers, oh and suspension is very hard, should i upgrade it?

Link to comment
https://www.sau.com.au/forums/topic/142521-is-anything-wrong-with-my-r33/
Share on other sites

popping noise would be your coil packs. had the same problem not long ago at the same rev range.

as for the swinging around, get wheel balance and alignment done..remember gtst is 4WS..so get front n rear done. cost about $150odd at pedders.

hope that helps..

the ecu may not have been modified. your speedo may just be out. on the dyno my speedo said about 195 when it hit the 180kmh limiter.

the popping my either be coils or spark plugs.

as for the tail of the car moving, i'd get a wheel alighment done and get all the suspension checked. there may be something broken or worn, or there may be a problem with the hicas system.

re swinging: you sure youre just not lighting up the rears with the lsd locking hard and both wheels losing traction, hence sliding around the palce :whistling: ...im not sure how familiar you are with cars

I have an idea how he might know that.... not the smartest idea if you are having problem with handling at less speeds...

Speed cut isn't set at exactly 180km in all ECU's... I don't know about skylines, but when exploring remaps of ECU, I was forwarded the 300zx data, speed limit was 188... slight variation in wheels or speedo calibration could easily see a few kms either way.

I love the old, throw it on a dyno for a tune... still not sure how you expect the "tuner" to alter data in the ecu if its stock, which it probably is otherwise you would probably know about it.

  Quote
I love the old, throw it on a dyno for a tune... still not sure how you expect the "tuner" to alter data in the ecu if its stock, which it probably is otherwise you would probably know about it.

i just took mine in for a power run and saw that the speed of the dyno said 180 when the limiter hit and the speedo said higher.

"Im pretty sure the ECU has been modified as my car does not cut out a 180..."

When I got my series 2 I also noticed it would go off the clock and just keep going, so I checked the ecu and discovered a ksp tuning label on it!!

Still trying to find out what has been done as far as I can tell no speed limiter and it was a pretty aggressive stocky also no response to the solonoid earthing for ''full time full boost'' :verymad:

Rear wobble is most likely a mm or two of toe out, or quite a few mm toe in.

Mine used to shake exactly the same. Found out the car was running 3mm rear toe in.

And for my all 4 tyres aligned, and suspension/driveline checked, it cost me $50...

Don't know why on earth people think 4WS costs more :S

My wheel alignment specialist reckons the newer and more "intricate" they get, the easier they are to set up.

yep popping noise is probably misfiring, caused by cracked coilpacks or worn spark plugs.

also when i had my stock ecu in speed cut was at 195 on my nismo 300kmh speedo, however that is probably inaccurate due to running different diameter wheels to stock..

Edited by yummy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...