Jump to content
SAU Community

Recommended Posts

Ok - the SBS theory is officially busted.

5 GT-R's from Vic - where we don't suffer from SBS - just made the trip to NSW all on semi-comp tires and packing a decent punch to complete 2 full days at Eastern Creek and Wakefield and have seen no sign of SBS. All that was needed was an extra litre of oil - and making sure the oil to start with is good stuff.

So SBS - Busted.

R32 FFS however (firewall fire syndrome) is definitely confirmed. 2 out of 2 R32's igniting their firewalls at EC is definitely something I'd be looking into if I was an R32 owner. That shit isn't cool. Engines can be fixed. Burnt to the ground shells are a little harder. Luckily that stuff burns slower than a cigar but still...

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/
Share on other sites

R32 FFS however (firewall fire syndrome) is definitely confirmed. 2 out of 2 R32's igniting their firewalls at EC is definitely something I'd be looking into if I was an R32 owner. That shit isn't cool. Engines can be fixed. Burnt to the ground shells are a little harder. Luckily that stuff burns slower than a cigar but still...

WTF?

Anyway, If you didn't all drive like girls you would get oil surge :(

What did you guys think of Eastern Creek, and how did you go for times?

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2662774
Share on other sites

lol. i needed 2L extra. unless my oil pressure guage needle is efected by hard left handers :)

although its pretty hard to hold a nice line while staring at a guage to see it bounce. wich it does. (not the factory one)

ps..WTF does sbs stand for?

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2663129
Share on other sites

sbs = sump baffle syndrome, it causes gtrs to sit in the garage instead of on the track until they have a baffled sump. It first appeared in NSW after a couple of cars spun bottom end bearings on the track (mine included), but has never seemed to spread to Vic.

Wierd.

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2663844
Share on other sites

sbs = sump baffle syndrome, it causes gtrs to sit in the garage instead of on the track until they have a baffled sump. It first appeared in NSW after a couple of cars spun bottom end bearings on the track (mine included), but has never seemed to spread to Vic.

Wierd.

It hasnt spread here because it simply isnt true ;)

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2664914
Share on other sites

It hasnt spread here because it simply isnt true

well thats just rubbish.

I don't know why you guys haven't had as much trouble as we hasve had up here but here are some things to consider:

* You guys have seen the same issue

All that was needed was an extra litre of oil

fair enough if you are happy with band aid solutions but don't try and claim there is no issue

* there is *far* more experience with proper circuit racing in NSW. Mark and I have been racing GTRs up here for 4 seasons, and sydneykid and those guys have even more experience. There is a world of difference between a 3 lap supersprint and a 12 lap race. There are no gtrs circuit racing in vic.

* may even be as simple as there are no big g, long right handers in vic, oran park off the bridge for instance is huge for surge.

Ever since putting in the trust sump we have had no oil pressure problems anywhere, circuit racing or at targa. This includes a 1 hour enduro at Oran Park where we ran out of fuel after 57 minutes racing but had no surge issues.

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2668059
Share on other sites

Its not rubbish far as i see it.

The problem is not due to the sump at all. The band-aid is spending money on the sump when its not whats causing it.

Its to do with the head retaining to much oil... hence the overfil counters it on a stocker motor to last out a 3-4lap sprint.

The problem arises when people dont overfil, after some laps there is not enough oil left down below and low-n-behold it does a number on the bearings.

If you have the motor apart, do the head right and there wont be a problem. Just over fill it and run around happy as a pig in poop.

That many cars that are doing some scorching times have no issues...

But then most of them have been loved by Racepace :D

Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2668336
Share on other sites

* may even be as simple as there are no big g, long right handers in vic, oran park off the bridge for instance is huge for surge.

Hay shed at P.I. is a 180+ right hander in a car with good rear end grip.

I have a 1994 R32 with a stock bottom end. So far 7 events with oil filled to the top of the dipstick "hump" with Castrol Edge 10W60, so good. Have had 3 20 minute sessions at P.I. with no issues.

That said, when the engine comes apart for a refresh - every manner of oil control issue will be addressed.

Regards

Andrew

Edited by BBGTR
Link to comment
https://www.sau.com.au/forums/topic/142895-mythbusters/#findComment-2704415
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...