Jump to content
SAU Community

Recommended Posts

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

omg ANOTHER cracked DBA rotor??? jesus these things are bloody dangerous.

I hate mine too! Less than 5000km and a track day and they are grooved and look worse than the 15year old stockers did

it was good. that must of been one of the only clean laps i got where it wasnt rev-limmited to 5.5k from overheating or cooler hoses popping off.

ps.. i know why i was poping them . i was spiking boost to 1.8bar lol.

the wastegate hose had a hole melted in it eek.

lanky71 that link doesnt work :P

Sorry, I changed the name of the album so it changed the link code, it is all working now just go to:

http://lanky71.myphotoalbum.com/

Then click on the small image on the left of page (should be 4 skylines) and it will take you to the first page of photos and you can navigate thru them all there.

Drew.

it was a great day and good 2 c some skylines out there. as well as a lot of exotics (5 lotus's !!)

It was very hot, not that gr8 4 turbo cars...

I have timing equipment and i managed a best for the day of 1:12:10 which i'm not really happy with...

My best previuously is a 1:11:39 at the Evo nats and that was with stock everything ecxept for semi slicks.

any way, onward to the dutton...




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...