Jump to content
SAU Community

R32 Gtst Type M Highly Moddified

lwboosted
 Share

Recommended Posts

lwboosted Rising Star

lwboosted

Posted
Posted (edited)

Ok its time to sell my car…

It is a HR32 GTST Type M, the car is in excellent condition I have owned it for a year and I am selling it as I want to get a GTR….

The Car makes 198.7 RWKW and a massive 707.7 NM of Torque!!!!! All on only 15psi….

The car currently has the standard turbo and that on because I got defected and so that I can sell it with a roadworthy…

I will either sell the car as is with the standard turbo and that, then sell the TD05/06, exhaust manifold, external wastegate, dump/front/cat, intake pipe, malpassi, oil lines. separately as a complete turbo kit.

Or

Sell the car with everything!!!!!!

List of mods… as the car is today……..

• 3 ½ inch catback exhaust

• Front mount intercooler

• Bosch 040 fuel pump

• SAFC 1 piggyback computer (controls air/fuel)

• Cusco front strut brace

• No name rear strut brace

• G4 fully height and damper adjustable racing coilovers

• 18 inch hp wheel

• RB25 series 2 gearbox conversion (series 2 has better syncros and energizers) “bulletproof”

• Custom tailshaft to suit

• Exedy heavy duty clutch, (5000kms old)

• Shortened gear shifter

• Boost guage

• Shift light

• Eclips headunit

• Kenwood 6x9 speakers

• 1000watt boss audio amp

• mono steer wheel

• gear knob

• GTR front bar

• Cold air intake

• Custom stainless steel airbox

• Maybe a few other bits and pieces I have forgotten about….

Car comes with a RWC

200rwkw 707.7 nm turbo kit (whats not on the car)

• Trust TD05/06 turbo (don’t know the specs rated at 450 hp) has a very large exhaust housing can see in pic

• Turbosmart 45mm pro external wastegate

• Modified exhaust manifold to fit the external wastegate

• Screamer pipe

• 3inch front pipe,

• 3inch cat with pipe welded through

• oil lines

• chrome intake pipe

• malpassi rising rate fuel reg.

with this turbo kit the car is very fast!! And sounds insane!!!! Who ever buys this car will have a lot of fun with the car… the first to see will definitely buy this… this kits bolts straight on and off my car no worries.. anybody could take it on and off in a day… everything lines up 100% I don’t want to separate as this kit has been made for this car tuned and everything!!!

price: $15000 with everything

will separate if needed to sell the car.

Imperfections on the car:

• small dint RH rear guard

• pin dint on LH door as well as a mark from an egg

• LH side skirt is cracked

• Front bar has 2 hair cracks (covered with tape and cant tell

• Minor wear on steer wheel and leather boots of shifter and handbrake

• Very small cigarette burn on driver seat..

• Interior is immaculate all air vents intact!!!!!!!!!!!

• Maybe a couple of other minor things I cant remember…

This car is excellent only serious buyers please!!

Mob: 0409556340

Located: VIC, Frankston South

post-24129-1163825811.jpgpost-24129-1163825902.jpgpost-24129-1163826064.jpg

post-24129-1163826121.jpgpost-24129-1163910158.jpg

Edited by lwboosted
Link to comment
https://www.sau.com.au/forums/topic/143774-r32-gtst-type-m-highly-moddified/
Share on other sites
ardie Experienced

ardie

Posted
Posted

leigh, dammit man! WHYYYY!!! such a nice car. people i can personally vouch for this car. for the conservative state of tune its in, it really does fly. also extremely reliable with no cost spared on modifications. compare the price of this to some of the stockers u find around and the cost of the mods done and this really is a bargain.

  • 2 weeks later...
lwboosted Rising Star

lwboosted

Posted
  • Author
Posted (edited)

Price drop!!!!

everything - $14500

minus turbo kit - $13500

minus turbo & suspension - $12500

minus turbo, suspension & wheels - $11500

note these parts will be replaced with standard items... and this comes with a RWC. REG 11/07

thanks leigh.

Edited by lwboosted
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...