Jump to content
SAU Community

Recommended Posts

Hey guys,

After finding out my water pump was indeed leaking I have decided to go ahead with a timing belt change + idler bearings while its easy to do. My mate who's doing it all at the moment asked for a timing belt kit, which consists of a Gates timing belt, 2 bearings?? = idler and something else I guess, and 3 'fields' (don't ask me what they are but he said they are cheap as chips).

Anyways, the bill for the kit comes to over $500 (think he said $550 for the kit) which to me sounds surprisingly high. Is this a rip or what?? I was thinking a timing belt is around the $130 mark, and the idler stuff was around $30 each, and the fields arn't much at all, so around $220-250 for the whole deal, not over $500??? Whats the deal? Is this right?

To make it worse, only one bearing was sent with the kit anyways.......

Fixxxer :D

Link to comment
https://www.sau.com.au/forums/topic/144150-500-for-gates-timing-belt-bearings/
Share on other sites

CBC sell those kits for about $400, they recommend retail of 650 to their resellers.

There is another source for the bearings a thread is posted here somewhere, they were much cheaper ($110 I think?) + about $100 for a nissan timing belt.

But it sounds like its too late for you already?

justjap sell the gates timing belts for $99

idler and tensioners go for around $80 each (coventry auto).

cam seals (have the same part number as the front crank seal on rb25's) go for $15 each from memory (LINCORP parramatta with SAU membership discount).

i got my timing belt from Nissan for ~$80, and both bearings from Bearing Industries or something (thread on SAU with contact details, and the guy knows exactly what you need) for under $100 for both of them.

as said just goto your local bearing shop for all that stuff.

Gates belts are like 90 bux, idler and tensioner is around 80-120(depends where you go), most seals around a few buxs each normally...as stated cam seals and front oil pump seal are the same.

If you stick with Quality after market you can't go wrong, Nissan don't make bearings and belts anyway. Try to keep to Japanese bearings - NTN, NSK, KOYo etc.

I have the old/genuine idler & tensioner bearings off my RB20DET in my hand now and they are:

fixed one = NTN - OFO63OLB - this one needed replacing at about 150,000 kms - really stuffed.

ADJ. one = NSK - 6006DWAX - this one i replaced anyway, still feels good.

TRy bearing traders if you are in Brisi or CBC elsewhere. Talk to someone who is in engineering and you'll find which are the good brands, but the parts I've got through bearing traders have always been top quality gear.

Edited by gts4diehard
  • 1 month later...

Sorry to bump this thread up..

But i need to change my timing belt soon..

I was wondering is there any difference between the gates timing belt or the Trust ones or any other jap brands??

Theres a 80 buck difference between the two.. But if the gates one does the job, might as well get that!!

But on the other hand, if quailty is better from Trust, then im ready to pay a little extra!!

Cheers all

Edit: Just did more research, and noticed that gates belt has a bit of noise on idle.. Will the Trust belt be the same??

Or better off just getting a genuine nissan belt for the 33??

Edited by siddr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...