Jump to content
SAU Community

Recommended Posts

V-spec came with slightly harder suspension and active rear diff.

When you upgrade the suspension there is no difference, and since they are getting old that is almost a necessity.

The active diff is poo if it stops working and is no faster anywhere while the std has a nicely setup 2-way LSD.

On R34 it has underbody diffusers and a deeper front lip.

On R32 it has Brembos and nicer 17" wheels.

Don't waste money on V-spec unless R34.

This was covered a month ago.

Can anyone 100% confirm this?

Is it possible that a Series II only got the red trimming on the seats but, no Xenons? if in fact this is true, is there a way of adding Xenon lights in the future?

Only series III got xenons.

You can add them sure. $2000.

32 vspec 2 might b worth it, and brembos were certainly a worthy upgrade for a 32.

owning an active lsd that hasnt mess'd yet i can tell you, its slightly more everyday friendly but still locks efficiently until it blows, then its supposed to be expensive..... let you know if i ever blow mine but considering i dont do burnouts mine should prolly last 4 yonks considering my car wont ever make enough power to exceed it's limitations... i think

Serious II? Must be a limited model *S* jk

frankxinyu, Whats the difference in driveabilty V-Spec Vs Std GTR?

haha i dont know what i was thinking...haha spelling fixed.

i have not driven a normal R33 GTR, so i couldnt tell u sorry. but as ppl sated, there are some minor difference

Can anyone 100% confirm this?

Is it possible that a Series II only got the red trimming on the seats but, no Xenons? if in fact this is true, is there a way of adding Xenon lights in the future?

Yes it is if someone has changed them, only series III had red seats. You can fit xenons to any 33 GTR ( with a slight mod) but they are very expensive even second hand in Japan. Halogens are O.K. as long as they are not converted xenons and you can make them a lot brighter by feeding 14 volts to them direct and use a rely to trigger them on.

There are a few little other differences in the series III as well. the front lip is different ( lower ) than S II and S I and the brake ducts are thicker. The front passengers blinker /vent is different , the fuse box cover has GTR on it, thats all i can think of now but i'm sure i missed something .

As Geoff said the struts are harder and about 5mm lower than none V-spec, Attessa pro, ALSD and the cluster and finned diff.

the series II gtr i am buying has red stiching in the front and rear seats?

http://www.skylinesaustralia.com/forums/in...howtopic=145115

Dude if this is the car , looks like its a series II with series III seats, looks like its not a V-spec either.

I knew i forgot something series III cars have a rear fog light as well, so only one reversing light.

That is definitely NOT the car I am buying!

The car I am buying is a 97 GTR V-Spec with the LSD light on the dash, red stiching on both the front seats and rear seats and also has a red reverse light on the RH rear of the car.

Well thats probably a series III with the xenons removed for compliance . How long has it been in the country? The reason i ask is because under the old system you wouldn't have to remove the xenons, only under sevs . Have a look at the front lip/brake ducts and the front left ( passengers side)blinker grill, as i said they are different in the III, what about the fuse box cover? What month 97 ?

The red light is NOT reverse light, its a fog light.

I'm currently looking at a 96 model 33 GTR V-spec and it has Xenons (listed as factory in the sale info), am I to believe that these are not genuine? The pictures certainly show Xenons.

Back to the topic,

My understanding of main V-Spec differences were,

ATTESA E-TS PRO

10mm lower and firmer suspension

Active LSD

LSD and ATTESA Pro combine to allow torque split left and right as well as front to back ike a standard GTR. It seems to be a big debate about it's merit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...