Jump to content
SAU Community

Recommended Posts

V-spec came with slightly harder suspension and active rear diff.

When you upgrade the suspension there is no difference, and since they are getting old that is almost a necessity.

The active diff is poo if it stops working and is no faster anywhere while the std has a nicely setup 2-way LSD.

On R34 it has underbody diffusers and a deeper front lip.

On R32 it has Brembos and nicer 17" wheels.

Don't waste money on V-spec unless R34.

This was covered a month ago.

Can anyone 100% confirm this?

Is it possible that a Series II only got the red trimming on the seats but, no Xenons? if in fact this is true, is there a way of adding Xenon lights in the future?

Only series III got xenons.

You can add them sure. $2000.

32 vspec 2 might b worth it, and brembos were certainly a worthy upgrade for a 32.

owning an active lsd that hasnt mess'd yet i can tell you, its slightly more everyday friendly but still locks efficiently until it blows, then its supposed to be expensive..... let you know if i ever blow mine but considering i dont do burnouts mine should prolly last 4 yonks considering my car wont ever make enough power to exceed it's limitations... i think

Serious II? Must be a limited model *S* jk

frankxinyu, Whats the difference in driveabilty V-Spec Vs Std GTR?

haha i dont know what i was thinking...haha spelling fixed.

i have not driven a normal R33 GTR, so i couldnt tell u sorry. but as ppl sated, there are some minor difference

Can anyone 100% confirm this?

Is it possible that a Series II only got the red trimming on the seats but, no Xenons? if in fact this is true, is there a way of adding Xenon lights in the future?

Yes it is if someone has changed them, only series III had red seats. You can fit xenons to any 33 GTR ( with a slight mod) but they are very expensive even second hand in Japan. Halogens are O.K. as long as they are not converted xenons and you can make them a lot brighter by feeding 14 volts to them direct and use a rely to trigger them on.

There are a few little other differences in the series III as well. the front lip is different ( lower ) than S II and S I and the brake ducts are thicker. The front passengers blinker /vent is different , the fuse box cover has GTR on it, thats all i can think of now but i'm sure i missed something .

As Geoff said the struts are harder and about 5mm lower than none V-spec, Attessa pro, ALSD and the cluster and finned diff.

the series II gtr i am buying has red stiching in the front and rear seats?

http://www.skylinesaustralia.com/forums/in...howtopic=145115

Dude if this is the car , looks like its a series II with series III seats, looks like its not a V-spec either.

I knew i forgot something series III cars have a rear fog light as well, so only one reversing light.

That is definitely NOT the car I am buying!

The car I am buying is a 97 GTR V-Spec with the LSD light on the dash, red stiching on both the front seats and rear seats and also has a red reverse light on the RH rear of the car.

Well thats probably a series III with the xenons removed for compliance . How long has it been in the country? The reason i ask is because under the old system you wouldn't have to remove the xenons, only under sevs . Have a look at the front lip/brake ducts and the front left ( passengers side)blinker grill, as i said they are different in the III, what about the fuse box cover? What month 97 ?

The red light is NOT reverse light, its a fog light.

I'm currently looking at a 96 model 33 GTR V-spec and it has Xenons (listed as factory in the sale info), am I to believe that these are not genuine? The pictures certainly show Xenons.

Back to the topic,

My understanding of main V-Spec differences were,

ATTESA E-TS PRO

10mm lower and firmer suspension

Active LSD

LSD and ATTESA Pro combine to allow torque split left and right as well as front to back ike a standard GTR. It seems to be a big debate about it's merit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be determined, Luke, to be determined. 😁 Definitely the car
    • It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It’ll be easier for me to find parts on the aftermarket side of things lol
    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
×
×
  • Create New...