Jump to content
SAU Community

Recommended Posts

this type of coupling does not need grease or a dust boot. also most unit joints are run without a cover or grease. automotive CV joints need to be packed in grease, and need a boot to keep the grease in and the dust out.

ummmm, dont you guys know that cv's a packed full of grease etc etc?

i wanna see that fancy join full of grease with a rubber cover over it.

i really dont think they are use them in the real world uncovered and unlubed etc.

steve

Its a low friction joint it doesnt need to be packed with grease. Havent u ever looked at the cv joints connection a tractor to a slasher? most of them dont have rubber covers. Theres been alot in my local paper about thompson couplings as they are based in my town. I'm thinking about buying some shares, this company is about to go bigtime. When/If these become available for cars it will mean less drivetrain loss :P

Its a low friction joint it doesnt need to be packed with grease. Havent u ever looked at the cv joints connection a tractor to a slasher? most of them dont have rubber covers. Theres been alot in my local paper about thompson couplings as they are based in my town. I'm thinking about buying some shares, this company is about to go bigtime. When/If these become available for cars it will mean less drivetrain loss :(

i was thinking the same hey, i have alot of money left over from holiday.

I never realised that a Unijoint constantly speeds up and then down with each revolution at an angle. Thats a fairly major improvement on the exisisting technology, shares could skyrocket if it stands the test of time, from what I could see it relies on those pins inside the cage to transfer the energy but I couldnt make out what they drive, I assume it is a set of holes that the pins align in, the pins themselves would be the weak point but with new alloys progressing everyday its quite possible.

Looks like not a bad idea, looks bigger then the equivilent uni tho.

Unless it can provide something sort after, current uni's are cheap enough to replace quite often. I think we picked up a uni for $80 for a Inter S-Line truck the other day. They dont fail that often.

Cheers

Sumo

Looks like not a bad idea, looks bigger then the equivilent uni tho.

Unless it can provide something sort after, current uni's are cheap enough to replace quite often. I think we picked up a uni for $80 for a Inter S-Line truck the other day. They dont fail that often.

Cheers

Sumo

it was made to transfer power more efficently, with that i assume it will come with a price

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Did you take the MX5 for a Blat around the Track at all?
    • LOL, "they said it might be slippery"..... 30 seconds in your off, 60 seconds in white twin backs into the corner That new track looks good, and the Datsun was chopping cars quite nicely     
    • I'll get one of these also just for giggles
    • I bought 6 new spark plugs to compare readings. They will be here tomorrow and ill see if meter is far off if it all. I know one is at least reading 0 so its best replace all anyway if one is bad, from experience. I still have to test the harness just to be sure its not a double issue and I waste my time haha-the old plugs are iridium I always thought those lasted more than 50,000 km.
    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
×
×
  • Create New...