Jump to content
SAU Community

Recommended Posts

thanks IanB sounds good your idea. but next cruse will be there early lol wont do a runer :P shold of stayed o well next time!!!

i was circled the car park cose of my crapey Navigation trying 2 get in and out lol

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

sorry guys, got in the car to go, went and got mcdonalds form dbay, (got abused, and egged on to fit by a gang on 13teen year olds) this got so bad they actually bought 30cent cones to throw at us.

when we finished and got up to talk to these pricks, they had gone lol

then instead of joining the cruise, i went and saw borat.

p.s sorry

no excuse bryn, softcork ;)

I need brakes :(

you also need to lose a few hundred kilo's :thanks:

Tell you what man, to make it up to you, do you want to go on a run sometime, like, me and you. Nothing competitive about it, and im not trying to call you out, but since you missed out this time im happy to take you to make up for it? Im sure thered be a couple of others to tag along too.

ill probobly see what I can do about orginising these once per month or thereabouts? Running them too much will see the numbers dip, and I need time to scout and plan the routes. Im thinking gold coast hinterlands next time would be fun, with a finish at a hoggs breath up there?

We will see when the time comes next month.

schweeeet my gtr could well be running by then :mage:

P.S heist, u also have a skyline that's an AUTO :P:(

Thanks Ian for organizing a great night, nothing wrong with that pace, any faster and i don't think the 31 could keep up :P

Good to see that rain hit AFTER the mountains, might have made it a bit dangerous on glorious

Look forwards to the next one.

Heads up to the guy from NSW who was running 30 mins behind us. Last contact I had with him, he was up jollies lookout when we were at summerset. It is unfortunate that he could not catch up, and I do appoligise to him for having to leave without him, but unfortunatly the needs of the many vs the needs of the few, and people had work early today so we just couldnt wait.

Totally ok Ian, I lost coverage for vodafone,. couldnt reply call nuttin once i was in glorious. so its all good, i enjoyed the drive up anyhow, so much so, thinking of going next friday night.

I appreciate ur waiting guys, I tried to be ontime but only found out about it at like 7pm. and had to go dinner wid the mrs. Hopefully next time I'm on time!. hopefully everyone had fun anyhow.

cheers,

Damn, I missed it!

Must be a nice night cruise to summerset, used to do it with some of my friends (civic), would be great to cruise there with other skylines!

There is just so beautiful and quiet, love it! Plz let me know when will be the next one, and give me sometime ahead to arrange my working shifts would be great, cheers!

WE GOT FLASHED IN THE ZED!!! hahahaha That was some funny stuff :thanks: 2 extra seats was said out our window then she turns and flashes!

Was an awesome cruise guys, cheers Ian for the invite :w00t: Seems you Skyline guys aren't as bad as everyone says LMFAO kidding guys :P We had an awesome drive (got back to the party we left REALLY late, after telling everyone we'd be only 2hrs) - was well worth it tho. Most fun I've had in the Z for ages!!! Was good to meet some nice new people and have a gasbag at the many pitstops :/

Top drive, top people and great fun :D Cheers again, I'd love to be on the list for the next one :D

Edited by MagicMikeZ32

awwww, damn, looks like i missed out on boobs! :D

oh, wait....

no i didn't :P

nah, seriously though, looks like a good night was had, bit annoyed i couldn't make it, but i'll try and make the next one... i need to put my semi's on and give them a bit of a drive so they don't just sit around and go hard.

ARGHH yes the dirty local bogans.. mmm mmm i had a funny taste in my mouth the whole time they were around.. i think i was throwing up in my mouth and repeatively swallowing it. YUMMYYY

Anyways, shame on ians stone guard flying off.. same with mine.. had to stop every 5 mins to pull it back up!!! GHEY!

Will be in for the next one.

Adz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...