Jump to content
SAU Community

Recommended Posts

Haltech for stock car hmmmm that can work :domokun: alwell glad to see you had a good experience, 122 atw kws + 10% factor as compared to other dynos, is 134.2 rwkws still falls short compared to mods that you have. Sorry just rambling

Cheers

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

anyone had any dealings with RPM performance in morayfield? just curious cuase i couldn't give peter (owner) a better rep. has more than look after since going to him. even caught him playing around with the tune on my wolf at 11pm. but then again he did tune it with 125rpm mapping points.

Haltech for stock car hmmmm that can work ;) alwell glad to see you had a good experience, 122 atw kws + 10% factor as compared to other dynos, is 134.2 rwkws still falls short compared to mods that you have. Sorry just rambling

Cheers

Hey dude

Yeah, Richard showed me the graph where after 3500 rpm my ecu shuts down a sensor and then basically just burns fuel coz it believes it's 4th of july and my name becomes Johny Dollar. So the Haltech was recommended to overide this problem and continue building power. Car will then be more economical with all the benefits of boost control blah blah blah. Also that was my first Dyno ever and i mean ever. Oh how i loved it. Expensive tho, i see how it can become addictive.

my brother had his timing adjusted there, and a tune, then a week later whilst at power cruise his crank angle sensor fell off during a 3rd gear drift >_< not fun.

Edited by Silver_R34_GT-T
  • 2 months later...

if i had not had my haltech installed by allstar and tuned, just left stock, i would probably still be with them (it is pretty hard to mess up a standard cars service), but after the ecu was installed and tuned incorrectly i have never been back, the people i am with now has a full disclosure policy and last service i asked if i could watch over the bloke who was doing the service on my car so i could learn a bit more about my car and pick the guys brain about skylines in general and they were only to happy to let me.

incidently getting back to allstar i later found out that richo had tuned my haltech to run so rich that it melted my high flow cat which partially blocked my exhaust severely limiting performance and exceleration, as a quick fix i had it gutted so for a while i had a 3 and a half inch straight through exhaust which sounded amazing, but illegal so i had a stainless steel high flow cat installed to fix that, it is quiet but at least i can have a incar conversation now. have a happy easter guys!

Hi guys

Ok, so i too have something to report. I have re-read this thread. Seems i got wiser with experience. OMG! Richard also took out my irridiums that were recommended by NGK. He told me the same thing as the other guys. He then put in el cheapo NGK's and lately seems to be a bit slow when starting. I also had to ask for my old spark plugs which were 12k old, they were going to bin them! Sometimes need 2 - 3 turns to start. With irridiums one hit and vroom!

Anyroad, i went to CNJ motorsport to tune my boost controller and airflow voltage bender. What a great experience! They let me sit in the car, tune the gizzmo's myself ( they operated car and dyno ). They were cheaper, quicker and about 30km closer to home.

Oh and i made extra 30kw at the wheels!

I ran Irridiums for years, never had an issue...

Heat range 6 and a 1.1mm gap worked a treat all the way to 332rwkw @ 21psi...

Never blew out the spark...

Nothing wrong with Irridiums, dont care what anyone has to say they worked well for me and id use them again...

I ran Irridiums for years, never had an issue...

Heat range 6 and a 1.1mm gap worked a treat all the way to 332rwkw @ 21psi...

Never blew out the spark...

Nothing wrong with Irridiums, dont care what anyone has to say they worked well for me and id use them again...

Thanks dude! At last, some common sense. I read your thread about spark plugs 30 min ago. I didn't have a problem either. Now startup seems weak. I'll change plugs tomorrow! They are 5000km old anyway.

Thanks dude! At last, some common sense. I read your thread about spark plugs 30 min ago. I didn't have a problem either. Now startup seems weak. I'll change plugs tomorrow! They are 5000km old anyway.

What thread was that... Must have been pretty old hey...

Iridium NGK Plugs

Yeah was 2005. Iridium NGK Plugs, that was the title. Sometimes too much info is confusing.

This thread ---> http://www.skylinesaustralia.com/forums/Ir...mp;hl=ngk+plugs

Yeah your link goes back to the main SAU front page...

Anything more than a year ago becomes a blur, thanks for the read I love catching up with old memories...

i had a small miss-fire on 16psi boost with the 1.1mm plug gaps. So I changed them for 0.8mm plug gap and no more probs! Car idled a little smoother as well! that help anybody?

As for the topic of tuning cars..

I got jacked off with 3 different 'tuners' who knew less about cars than I did!

so i ended up doing a street tune myself with a mate to drive.

This is not the ideal way to do this, its takin heaps of fuel, heaps of time and way more time again to read info from tech heads on how to do it and not blew up the engine. But the set up is very strong and goes like stink. Soon-ish i want to get it onto a dyno and see how well ive done :D ..

I can assure you all that I am 900% smarter for doing all the above, and now 2 of my mates want theirs done for same reasons, but I want to get mine on the rollers, be in or beside the car as they do the job, and pick their brains like crazy!

My ecconomy is way better, torque is great.. I just want to be able to fine tune the top end a little better.. its a project that is still drivable!

Anyhow, If a shop has wronged u, dont be hostile about it. Calmly let them know that you were not impressed with their work and explain y you will not be returning. Most times the shop will be happy to try and fix the issue. Sometimes this is just not possable.. to just quietly leave.

i had a small miss-fire on 16psi boost with the 1.1mm plug gaps. So I changed them for 0.8mm plug gap and no more probs! Car idled a little smoother as well! that help anybody?

the reason u had miss fire was becuase the gap was to big, as boost came on the spark was being blown out

the more boost you run the less the gap

on a rb25/rb26 running 1bar the ideal gap is 0.75mm

on a rb25/rb26 running 1.5bar and higher 0.6mm is need

ive had my car at a few workshops... a few id never go back too, my car is going well with alex at gt auto, chapmen and chapman is also good.....

all star didnt return my call so meh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...