Jump to content
SAU Community

Recommended Posts

Have seen this in the flesh and it looks great! When are you starting your build thread? :)

Thanks for the kind words :) Might look into it actually just need to go back and find all my backed up pictures during the rebuild :)

R34 GTR's look tough as stock. I would just lower it slightly and chuck some spacers on, say, 20mm and you got a tough looking guy already.

Heck, buy my spacers: Quality 20Mm Spacers Cheap For Quick Sale! - Skylines Australia

Looking at getting fitting on my skirts and rear pods now so should make it look abit tougher. Would get the spacers but im eyeing out some 19 x 10.5 +12 TE37's for her very shortly :)

Nice Plates :)

Cheers :) very cheap too as they fell into the AAA - 11A category and its not classified as a full customised plate otherwise wouldnt have gotten them if they came with the hefty price tag

RTA Sold our plates to a private company so they can rape us as hard they like :/

Just finished my latest set. R34 GTT (not an R)

here are a couple of my favs from the set.

6930680713_692ebc49ff_z.jpg

6934664487_c1f65f6ecb_z.jpg

6805227342_f36b9c18f0_z.jpg

6817753344_4b7d99466b_z.jpg

Edited by MaTBoY

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Nice. Good to see some GTT's! What fitment you running there?

Nice. Good to see some GTT's! What fitment you running there?

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

I like it, not too crazy just a nice flush look. You have any side on pics?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This sounds like someone who would have owned an R33 in their past... It's okay, I'm 100% picking up what you're putting down Mark.
    • Just back on what was raised about jacking off the the tow/tie down point on the front of cars. I've used it plenty. I've also watched it on a car where you could see it move the front end of the car. It was like the front end/whole car being tweaked and twisted a bit. I will say, I struggle to find good jacking points on MOST cars. The ones that have good points, I then normally struggle to find a jack tall enough to make the car change height!   One of my go to points for either the jack, or the axel stands though, is either a suspension pickup point, OR a subframe to chassis major bolting point. I actually think its the subframe on my R33 that has a bit of a bend in it, from being jacked in the middle too. However, it could have been one of my many other cars I've had over the years! Or it could also be the from me jacking it up, and the fact the top of the front radiator support isn't there, so it can allow the front of the car to move and bend etc.
    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
×
×
  • Create New...