Jump to content
SAU Community

Recommended Posts

Have seen this in the flesh and it looks great! When are you starting your build thread? :)

Thanks for the kind words :) Might look into it actually just need to go back and find all my backed up pictures during the rebuild :)

R34 GTR's look tough as stock. I would just lower it slightly and chuck some spacers on, say, 20mm and you got a tough looking guy already.

Heck, buy my spacers: Quality 20Mm Spacers Cheap For Quick Sale! - Skylines Australia

Looking at getting fitting on my skirts and rear pods now so should make it look abit tougher. Would get the spacers but im eyeing out some 19 x 10.5 +12 TE37's for her very shortly :)

Nice Plates :)

Cheers :) very cheap too as they fell into the AAA - 11A category and its not classified as a full customised plate otherwise wouldnt have gotten them if they came with the hefty price tag

RTA Sold our plates to a private company so they can rape us as hard they like :/

Just finished my latest set. R34 GTT (not an R)

here are a couple of my favs from the set.

6930680713_692ebc49ff_z.jpg

6934664487_c1f65f6ecb_z.jpg

6805227342_f36b9c18f0_z.jpg

6817753344_4b7d99466b_z.jpg

Edited by MaTBoY

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Nice. Good to see some GTT's! What fitment you running there?

Nice. Good to see some GTT's! What fitment you running there?

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

I like it, not too crazy just a nice flush look. You have any side on pics?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...