Jump to content
SAU Community

Recommended Posts

Have seen this in the flesh and it looks great! When are you starting your build thread? :)

Thanks for the kind words :) Might look into it actually just need to go back and find all my backed up pictures during the rebuild :)

R34 GTR's look tough as stock. I would just lower it slightly and chuck some spacers on, say, 20mm and you got a tough looking guy already.

Heck, buy my spacers: Quality 20Mm Spacers Cheap For Quick Sale! - Skylines Australia

Looking at getting fitting on my skirts and rear pods now so should make it look abit tougher. Would get the spacers but im eyeing out some 19 x 10.5 +12 TE37's for her very shortly :)

Nice Plates :)

Cheers :) very cheap too as they fell into the AAA - 11A category and its not classified as a full customised plate otherwise wouldnt have gotten them if they came with the hefty price tag

RTA Sold our plates to a private company so they can rape us as hard they like :/

Just finished my latest set. R34 GTT (not an R)

here are a couple of my favs from the set.

6930680713_692ebc49ff_z.jpg

6934664487_c1f65f6ecb_z.jpg

6805227342_f36b9c18f0_z.jpg

6817753344_4b7d99466b_z.jpg

Edited by MaTBoY

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Nice. Good to see some GTT's! What fitment you running there?

Nice. Good to see some GTT's! What fitment you running there?

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

I like it, not too crazy just a nice flush look. You have any side on pics?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...