Jump to content
SAU Community

Recommended Posts

"Im trying to find the part numbers... for the inside ones.."
"Pt# 80324-04U03 BRKT STOPER (Bracket Stopper)."

These are the little buggers that do all the damage...twin 20mm wide scratches on the inside

The older Fast number was superceded with this one.

Hey guys. I got a scratch in my window too not long ago. This wasdue to getting a stone caught in the felt pads. To clean all the window runnners etc i just removed the inner door trimm to allow easy access to felts (well dir). You can get a rag or an "OLD" Tooth brush and some warm water and brush all the grime out of the rubber strips that touch the glass and get to the flet runners also. This made a world of difference and now i should be less liikely to get scratches.

Hey guys. I got a scratch in my window too not long ago. This wasdue to getting a stone caught in the felt pads. To clean all the window runnners etc i just removed the inner door trimm to allow easy access to felts (well dir). You can get a rag or an "OLD" Tooth brush and some warm water and brush all the grime out of the rubber strips that touch the glass and get to the flet runners also. This made a world of difference and now i should be less liikely to get scratches.

Thats an awesome tip... provided your felt pads arent worn out already..

"Pt# 80324-04U03 BRKT STOPER (Bracket Stopper)."

I assumed that was the part number for the R32? is it the exact same part in the R33?

Edited by MotoMan

O.K. I got around to having a fiddle with my windows today. The scratches are on the outside of the window and therefore wont affect any tinting you get done, so go ahead and tint those suckers up. Having typed that there is also a brush on the inside of the door that i've yet to locate in FAST..looks like another trip to the Nissan dealer

Pic 1.

post-24470-1166928004.jpg

This is the damage, vertical lines on the exterior of the glass.

Pic 2.

post-24470-1166928137.jpg

The brushes.

Pic 3.

post-24470-1166928473.jpg

The offending brush highlighted..there are two and they are a simple slide in deal. The brush on the inside is the one i've yet to track down. If yoy decide to go ahead please add to this thread so we can cobble a DIY for the rest

i pulled my door trims off today to install some speakers and i had a look on my window and realised i have a big scratch mark up the INSIDE of the drivers windows (which i just got tinted 3 days ago!!!!!!!!!) im so upset this has happened as i didnt see any scratches before the tint

also the fury pads look to be just about brand new on both passengers and drivers side so i dont know what the problem is

its a 33 btw

"...so i dont know what the problem is its a 33 btw.."

All i can say is get the trim off and have a look

"... But how much does a new window cost? And can I get one from say a Windcreens Obriens rather than Mr. Nissan?

I think the Beer Baron picked one up for about 160..mine cost me 220 from a wrecker...its perfect. I would imagine that the OEM one would be a prohibitively expensive proposition...hey Justin when are we going to see a pic of your R with the RGII's?

Someone has posted before if u pull them out and soak them in hot water it will restore them to near new condition.Someone try it and tell if it works :D

It may work it there isnt too much crap in them and their not too flogged

OK how;s this then. You all know how kids are scratching graffiti into glass these days right? Well, there are now a few companies who buff out the scratches in the glass. I'll be contacting them as soon as they open again.

The fingernail deep scratch in glass = no hope... is now a thing of the past!

  • 1 month later...

whats the update on these, like my windows are like the one you had mr keets. is there a price on new windows from nissan and has anyone found out the number for the window guid thingy on the inside??

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...