Jump to content
SAU Community

Recommended Posts

Now is it true that triptonic skylines are slow?

I dont believe it

Slow at what? Gear changes? The upshift on the 34's about .5-1second, the downshift's pretty quick also. But a MV Auto shift kit would do wonders to the tiptronic box.

If you're wondering what's achievable.. with shift's check out video's alexcim's posted.

http://www.skylinesaustralia.com/forums/in...t&p=2719382

Now tell me that's slow.

But if you mean tiptronic line's are slower in terms of getting power to the ground.. the general power loss is around 8-10rwkw going for the auto.

the tiptronic is still an auto box, meaning greater power loss, and shifts that are similar to a manual (maybe a just a bit quicker/slower whatever, but not much in it), so in stock form i'd imagine it would be slower down the quater or on a track...

if the auto was properly built, then it would absolutely destroy the manual for quater mile performance

Straight line there ain't much between it (8-10rwkw drivetrain loss ain't too bad)... around the bendy bits.. well we've all seen enough video clips to know the auto (even in tiptronic form) doesn't cut in there.

Check out the number of quick drag nissans there with auto boxes.. some australia's fastests drag 300zx's and 200sx's are autos. Same can probably be said about skylines.

Where you hit a limiting factor is in tuning options for auto boxes... not all aftermarket ecu manufacturers support tiptronics (e.g. PowerFC). So guess you'll have deal with that when you start making some serious power.

Edited by Howie

My R34 is Tiptronic and I only drive it in tiptronic mode, not as fun or controllable as a manual but better than auto. Who else has been in auto mode and thought they were in tiptronic mode shifting up to neutral only to hear that horrible free rev and think they have broken the auto, then embarrassingly realise what you have done :D

LOL i've done that once. I'm with you, for normal driving i always leave it in tiptronic and change through the steering wheel - it's just nicer to be in control most of the time.

My R34 is Tiptronic and I only drive it in tiptronic mode, not as fun or controllable as a manual but better than auto. Who else has been in auto mode and thought they were in tiptronic mode shifting up to neutral only to hear that horrible free rev and think they have broken the auto, then embarrassingly realise what you have done :)

I always drive my 34 in Tiptronic mode. and YES have accidently shifted to Neutral when in normal... its not a good feeling is it.. but overall its not too bad... I have heard all about MV being able to work wonders on the boxes... I love it when your stuck in peak hour traffic.. just shift it to auto mode...

tip isn't that shit...auto isn't as shit as every1 reckons...I have both and they both have their advantages.

I gotta say I love to drive the tip after driving back in peak hour with my twin plate...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
    • Looks great, but I'm always concerned that it makes it difficult to see what level the fluids are at. Am I overthinking this?
×
×
  • Create New...