Jump to content
SAU Community

Recommended Posts

Hey people, anyone with any ideas on this topic would help.. im driving an r33 gtst with a trust fmic and forward facing plenum chamber and a greddy emanage which are the main mods... stock turbo, recently had it on a dyno to find it had 139.9 rwkw... which is kinda a swift kick in the nuts since its running 12psi... the ignition coils are fine.. air/fuel is good.. exhaust is a 3" front pipe to a 2 X 2.5 cat back system. fuel pump is a walbro pump of around about 500hp... when you drive it you put your foot down and it just doesnt really go anywhere like it should, i seriously think i could run quicker... but theres no missfire or anything.. just no power. theres a broken knock sensor snapped off in the block but i've been told the emanage bypasses that (hence why i baught it) and i beleive it has... any idea whatelse to look at as too why im about 40/50 rwkw shy of what i should be?? only thing i can think of is maybe the timing..

Link to comment
https://www.sau.com.au/forums/topic/148675-less-power-then-stock/
Share on other sites

I had my car on the dyno the other day, and knew previously it had run 185kw. The dyno showed 140kw, and the dyno operator was saying 'wow, thats a good result'. He was clueless and thought it was an RB20, not RB25.

Anyway, my timing ended up being WAY out, and that was causing power problems. was -4 deg (retarded), and we moved this to -12 deg to run 195kw.

I wonder if timing could be your problem?

After the comp test, i would look @ the tune and parts that have been fitted

There are other things like the plenum etc that could be the issue... as most of the stock parts easily get you into the mid 200's

Exhaust might be restrictive aswell or the cat has collapsed.

There are lots of options

comp test X3

timing belt/cam timing

check all sensors are working except the ones u dont need like knock etc (could just have an electrical gremlin somehwere)

tuning - where did you get it done? take it t a reputable tuner

what dyno/how was it run?

Edited by VB-
Hey people, anyone with any ideas on this topic would help.. im driving an r33 gtst with a trust fmic and forward facing plenum chamber and a greddy emanage which are the main mods... stock turbo, recently had it on a dyno to find it had 139.9 rwkw... which is kinda a swift kick in the nuts since its running 12psi... the ignition coils are fine.. air/fuel is good.. exhaust is a 3" front pipe to a 2 X 2.5 cat back system. fuel pump is a walbro pump of around about 500hp... when you drive it you put your foot down and it just doesnt really go anywhere like it should, i seriously think i could run quicker... but theres no missfire or anything.. just no power. theres a broken knock sensor snapped off in the block but i've been told the emanage bypasses that (hence why i baught it) and i beleive it has... any idea whatelse to look at as too why im about 40/50 rwkw shy of what i should be?? only thing i can think of is maybe the timing..

when i first got mine I ran it up on stock turbo @ 10psi, FMIC, 3" cat back zorst and Emanage I ran 180rwkw...The plenum probably wont add much with ur power levels..

Should should be the same if not better than that result.

Thanks for all the advice fellas. im taking it over to melbourne now in the middle of feb for someone to look at.. no mechanics down here would have half of a clue what to look for... cant think of the name of the place im going too off the top of my head but i have one of the head fellas of autobarn in melbourne helping me so hopefully it can be fixed just by tweaking something on the dyno. if i had a light i'd check the timing myself but i cant really be bothered at the moment... once again, thanks for your input

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...