Jump to content
SAU Community

Recommended Posts

I'm currently in the process of setting my car up for my first track day in January, and I currently need new rear tyres quite badly. I want to try a track day with street tyres first, because if I don't like it, I don't have a wasted $1600 bill from buying semi's.

What tyres would you guys suggest?

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/
Share on other sites

I'm in the same boat as you. Want semi's later but now i want street tyres that will be fine for the occasional track day.

I've heard that Michelin Pilot Sport are good.

Yeah those Michelin's seem quite good from what I have read. What price range you think they'd fall into? (235/40/18)

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2774951
Share on other sites

Theres not a huge difference in street tyres on the track, most street tyres heat up very quick and get squirmy. In general the better the tyre on the street, the better it will be on the track, but only marginally. Just get whatever you want for street and go out there with them on the track and have some fun.

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2775386
Share on other sites

It would be best to have the same brand/model of tyres on all corners of the car, as having a mismatch can lead to the tyres on one end of the car over heating or going off before the others, causing all sorts of handling problems.

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2777216
Share on other sites

Well I spoke with the tyre guy that I buy my tyres from, and he suggested if I were to go for street I should use Toyo T1R's, although he seems to recommend the Kumho semi slicks (I think they were V70a) instead. Im seriously thinking about the semi's.

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2777480
Share on other sites

  • 2 weeks later...

Another option for a good comprimise tyre is the Federal 595RS. Speak to President James as Federal are looking at giving SAUVIC members discounts on their tyres. He has some on his EVO now and they look pretty good.

http://www.federaltire.com/en/html/pdetail...line=1&ID=3

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2805614
Share on other sites

I did a 1.35 at winton using Nangkang NS2's lol...... They are fine , just learn how to drive the car!! but they will go sloppy after 5 or so laps

The long track?? In what??

And Shane, I wouldn't worry about not liking the track days, you'll be hooked >_<

Also, sorry about the delay in sending those pics, I haven't had access to my other computer. I'll send what I've got through to you now.

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2805691
Share on other sites

Hmm, he told me he did 1.37 (which is still pretty impressive going by other peoples times) with the Nankangs and was hoping to crack 1.35 with semis

S13 with T518z, nothing crazy.

Is it even possible on street tyres?

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2806273
Share on other sites

Rowdy - No.

Basically Chris and I were discussing this yesterday and we have decided that moddified class will be for tyres with a UTQG of below 100.

So that means tyres such as the Federal 595RS (UTQG 180), Falken Azien RT615 (UTQG 200) and Toyo R1A (UTQG 100) will all be eligable for Standard Class.

We will put up a list shortly of all tyres that will fall into moddified class but the Federals will definitely be in standard class.

Link to comment
https://www.sau.com.au/forums/topic/148751-street-tyres/#findComment-2808812
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...