Jump to content
SAU Community

Gauges

IanB

By IanB,
in Queensland

 Share

Recommended Posts

IanB Veteran

IanB

Posted
Posted

Hi All

Im after a few more gauges for my GTR... I want to put boost and AFR on my Apillar...

How much for a decent AFR gauge and Boost gauge along with the Apillar mountings? Also I want to keep them to a similar style and keep them in synch with the stock gauges of the GTR. Does anyone have any recomendations?

Alternativly I wouldnt mind replacing the face of the stock boost gauge with one I can read and understand.. but doesnt the stock boost gauge only go up so high and then its past the ability of the gauge to report, even with a new face on it? Is re-facing the stock gauge feasiable or is it a waste of time?

Thanks Everyone.

Link to comment
https://www.sau.com.au/forums/topic/150161-gauges/
Share on other sites
Einstein Proficient

Einstein

Posted
Posted
they are also very hard to see around especially when your doing mountain runs. it gets real annoying

god knows my 34 has enough blind spots already

i'd love to have a-pillar gauges but i'm only just getting comfortable with my peripheral vision as it is

(for slightly sideways stuff)

Link to comment
https://www.sau.com.au/forums/topic/150161-gauges/#findComment-2798067
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

I have A-pillar gauges and have to say they do block out some vision and to be honest I dont really look at them at all...

I may enven try and get my hands on a standard a piller to replace mine as Im not too keen on the glow in my eyes...

Link to comment
https://www.sau.com.au/forums/topic/150161-gauges/#findComment-2798114
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...