Jump to content
SAU Community

Recommended Posts

There is no way those two exhaust tips, assuming they're remotely indicative of the rest of the exhaust, would flow 900hp. Especially not in FI guise.

And, aside from the lack of intercooler, the V35 engine bay is pretty cramped. There's no venting to let out all that heat, of which there will be a shitload.

And a 1200hp car that doesn't have any gauges for you to check on coolant and oil temps? Assuming the car could even make that kind of power with its restrictive exhaust....not monitoring your temps and giving the heat no way to escape is a recipe for destruction.

Please NO DREAMERS

The guy clearly has no mirrors in his house.

lol thats funny

i just requested for engine bay pics so we'll see when or should i say "IF" i get a reply with pics lol

ben...

Same here.

Bet you he is now looking for some heavy modified V35 pics to get an engine bay pic :)

did you even need to ask? I mean he uses words like:

CONESOUR

enki

HKS from the Turbo back (5500)

It was on the dyno 18psi and made 900hp low tune boost hi octane on 24psi 1200hp

slotted over sized disks

I'd love to know what "low tune boost hi octane on 24psi" means... 1, there is no way any of the stuff he claims is true (I mean half of it doesn't even exist) and 2, I doubt he even owns the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...