Jump to content
SAU Community

Diff Whine - R32 Gtst 150k

MichaelB
 Share

Recommended Posts

mark32gts-t Collaborator

mark32gts-t

Posted
Posted

Make me the third. Mine whines when coming off throttle or rolling in neutral. Fairly annoying, thought of just buying a second hand diff and housing and swapping it over. But then how do I know the next one wont do it too. From what I've been told they can whine if the gears dont mesh together properly. So if the gears are worn there is play in the diff, hence it whines when not accelerating. I've been thinking of trying a different oil. might help a little. Any thoughts????

GTS4-32 Rising Star

GTS4-32

Posted
Posted

i got the same problem. As the speed increases the whine gets louder. I got myself another diff for $300. Havnt put it in yet, but wen i get the time ill put it in, and hopefully all works out, and i refilled the new diff with penrite diff oil. I heard that aint bad either.

skylinegtts Experienced

skylinegtts

Posted
Posted
Rip the diff out, get the bearings replaced and the crown wheel/pinion checked and the clearance adjusted.

Done.

how much would that cost to get a mechanic to do it?

also how much do u think it would cost if i rip the diff and send it to the mechanic?

cheers

siddr20 Grand Master

siddr20

Posted
Posted

Most likley they will charge per hour.. Around 75 bucks an hour by most mechanics..

Maybe worthwhile if you bring your car into the shop and let them check it out and rip it apart..

Let them find the problem first, and then go from there.. Could be just a simple fix..

dontfeelcold Experienced

dontfeelcold

Posted
Posted

For a complete reco for the diff in my R31 skyline (bearings, seals, crownwheel and pinion) and removal and fitting was it was $950. I am kicking myself for not doing it.

It is actually quite a easy job to reco a diff if you have a basic knowledge of tools. The only special tool you need is a dial indicator to do the back lash and a oxy torch to heat the crownwheel up to put it on the diff centre. You will also need a torque wrench to test the limited slip diff. You will also need to mesh the diff properly, that info can be found in those gregories car manuals or on the internet.

T04GTR Grand Master

T04GTR

Posted
Posted

yeah. ive got the same issue.

i thought id try to launch my gtr with a nismo tripple.

it didnt like it much. now it whines lol. not bad. but coz ive got a solid mounted subframe it makes the noise all that much more louder

so yeah. r200 diff reco.. how much??

mark32gts-t Collaborator

mark32gts-t

Posted
Posted

taking the diff out isn't that hard. unbolt the drive shafts, unbolt the shaft coming from the gear box. and then there are two bolts at the front to remove, and i think 2 or 4 on the back. For $950 you could buy a 2-way, or 1.5-way.

for a gearbox shop to just have a look/listen they probably wouldn't charge you. but i spose different places may charge. anyone recommend a gearbox/diff shop? in brisbane

slip Mentor

slip

Posted
Posted

my 31 diff whined, as they do, especially after a number of skidpan days.

used synth fluid and some diff addative (lucas i think) from supercheap, and it was sweet.

addative is cheaper than a new diff. I had a 2nd hand reconditioned LSD centre put into my 31 for $500.

just keep a spare diff on hand.....

skylinegtts Experienced

skylinegtts

Posted
Posted

sorry for the stupid question

but would it still be alrite to use it at track days and stuff... coz its something i dont want to upgrade/repair yet until i decide what i want to do with it? rebuild it or go mechanical 1.5/2 way

  • 3 weeks later...
skylinegtts Experienced

skylinegtts

Posted
Posted
yeah. ive got the same issue.

i thought id try to launch my gtr with a nismo tripple.

it didnt like it much. now it whines lol. not bad. but coz ive got a solid mounted subframe it makes the noise all that much more louder

so yeah. r200 diff reco.. how much??

Dave

have u got a quote for it yet? if you did where abouts did u go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R34 GT-T cycling ABS pump

      By Dose Pipe Sutututu · Posted

      Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      The roof is wrapped
×
×
  • Create New...