Jump to content
SAU Community

Recommended Posts

Make me the third. Mine whines when coming off throttle or rolling in neutral. Fairly annoying, thought of just buying a second hand diff and housing and swapping it over. But then how do I know the next one wont do it too. From what I've been told they can whine if the gears dont mesh together properly. So if the gears are worn there is play in the diff, hence it whines when not accelerating. I've been thinking of trying a different oil. might help a little. Any thoughts????

i got the same problem. As the speed increases the whine gets louder. I got myself another diff for $300. Havnt put it in yet, but wen i get the time ill put it in, and hopefully all works out, and i refilled the new diff with penrite diff oil. I heard that aint bad either.

Rip the diff out, get the bearings replaced and the crown wheel/pinion checked and the clearance adjusted.

Done.

how much would that cost to get a mechanic to do it?

also how much do u think it would cost if i rip the diff and send it to the mechanic?

cheers

Most likley they will charge per hour.. Around 75 bucks an hour by most mechanics..

Maybe worthwhile if you bring your car into the shop and let them check it out and rip it apart..

Let them find the problem first, and then go from there.. Could be just a simple fix..

For a complete reco for the diff in my R31 skyline (bearings, seals, crownwheel and pinion) and removal and fitting was it was $950. I am kicking myself for not doing it.

It is actually quite a easy job to reco a diff if you have a basic knowledge of tools. The only special tool you need is a dial indicator to do the back lash and a oxy torch to heat the crownwheel up to put it on the diff centre. You will also need a torque wrench to test the limited slip diff. You will also need to mesh the diff properly, that info can be found in those gregories car manuals or on the internet.

yeah. ive got the same issue.

i thought id try to launch my gtr with a nismo tripple.

it didnt like it much. now it whines lol. not bad. but coz ive got a solid mounted subframe it makes the noise all that much more louder

so yeah. r200 diff reco.. how much??

taking the diff out isn't that hard. unbolt the drive shafts, unbolt the shaft coming from the gear box. and then there are two bolts at the front to remove, and i think 2 or 4 on the back. For $950 you could buy a 2-way, or 1.5-way.

for a gearbox shop to just have a look/listen they probably wouldn't charge you. but i spose different places may charge. anyone recommend a gearbox/diff shop? in brisbane

my 31 diff whined, as they do, especially after a number of skidpan days.

used synth fluid and some diff addative (lucas i think) from supercheap, and it was sweet.

addative is cheaper than a new diff. I had a 2nd hand reconditioned LSD centre put into my 31 for $500.

just keep a spare diff on hand.....

sorry for the stupid question

but would it still be alrite to use it at track days and stuff... coz its something i dont want to upgrade/repair yet until i decide what i want to do with it? rebuild it or go mechanical 1.5/2 way

  • 3 weeks later...
yeah. ive got the same issue.

i thought id try to launch my gtr with a nismo tripple.

it didnt like it much. now it whines lol. not bad. but coz ive got a solid mounted subframe it makes the noise all that much more louder

so yeah. r200 diff reco.. how much??

Dave

have u got a quote for it yet? if you did where abouts did u go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...