Jump to content
SAU Community

Recommended Posts

Hi all,

My power Fc will be arriving in a week or two and im going to get it tuned straight away.

Who tuned your power fc?

I was thinking of going to Unique but i would like to see what other line owners have done.

Croydon is another option too.

What was the state of tune before you went?

Before and after results(including AFRs and RWKW)

I know price will be between 5-600 bucks.

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/150869-who-tuned-your-power-fc/
Share on other sites

  • Replies 135
  • Created
  • Last Reply

Top Posters In This Topic

u have so may options mate! CRD are the best, then theres the others such as unique, unigroup, hitman, advan, belgarage, rigoli..the list goes on..the cheapest u will get it done anywhere will be 500 and that will most likely be hitman in penrith. A tune netted me about 25rkws, but it really depends on how your ecu is performing atm. If its coping well with you mods, the gain will be less than somwhere whose ecu has hit R & R and is running bad afr's, timings out, etc, etc...ring around, but youll still be v happy with a tune, even if ur max power is'nt too much higher, as you will notice that your overall power, particualrly in ur midrange is a lot better.

:(

Unigroup gets my vote.

Was tuned but super rich @155rwkw when i dropped it off, no change in boost and power was up to 185rwkw when finished.

Final AFRs are between 11.9-11.6 between approx 4000-7000rpm, i asked for a rich safe tune which is what i got.

Edited by siksII

Hitman did my tune, he had my car for about 2.5hrs and did an excellent job, car now has 199rwkw with the standard stage one mods and i get 500km out of a full tank of petrol (was getting 350-400km max pre-tune).

Ontop of that he's a top guy, service was excellent. He gets my vote.

Edited by R3LOAD

Another vote for matt...ie Hitman

He treats you more like a friend than a customer and his work is great with reasonable prices.

I remember a few years back when I went to his new location in Penrith...well new back then and we were bored and so he started to dyno things around the workshop like his Husqi dirt bike....

haha he even dynoed me.....I only managed 0. something hp :P

CRD is a bit pricier than other places, but I would have to say they are the best (That's what Jim does all day-tuning). The new guy at Bel Garage is pretty good himself.

My first tune was at unique motorsports tuned by Ben. I was running too rich and after having my car tuned at CRD and Bel, in comparison I can say the car was not smooth. It was smooth at the time as that was my first tune.

Unique

@ 14psi = 197 rwkw

@ 15psi = blew my turbo (they said the turbo could easily handle 15psi. Little did i know)

CRD

@14psi = 212rwkw

Bel

Whole new setup, so can't compare.

Ben from Unique Autosports tunes my car.

Original:

http://www.notonmonday.com/images/dynoday/...i%20(Small).jpg

PowerFC etc:

http://www.notonmonday.com/images/skyline/...rFC_psi_web.jpg

PowerFC etc + more etc:

http://www.notonmonday.com/images/myupgrad...T30rAFR_web.jpg

It's been retuned again since. Damn thing is perfect. He redid the profec B spec 2 boost controller too.

This stuff has been covered a few times, so do a search and you'll get some more info.

While we're at it though...

Mark at MRC in Castle Hill does my tuning. He's very knowledgeable and thorough with both tuning and mechanical work and just a downright nice bloke who takes the time to explain everything to you when he's working on your car. I highly recommend him...

Can't compare before and after as it was a new set up - but my car made 285rwkw @ 17psi with a nice flat AFR of 12 (as evidenced by anyone who was at the SAU dyno day last year).

I tuned my own Power FC....

Damn it was fun and it cost me a hell of alot less then $500.. I had to do it myself as i put the engine together myself too (except crank and pistons cos its a fully forged setup)

Only tuned it to 15 psi going to hire a dyno before i go to 25psi as i dont want to break any land speed records or the speed limit in the process :wub:

laptopautronic.jpg

any others with a unigroup tune??

Mine goes in there friday - spoken with the guys there and they seemed to earn my business!

Yep. Yavuz does good work. My car has been going on their dyno fairly regularly over the last 3 years to check things are safe after mods were done and was tuned when i originally got my pfc about a 18 months ago, touched up when i got my cams, and then back on for a check at the end of last year.

Their prices are pretty good too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
    • Sounds like the oil pressure light is wired into the oil temp sensor... As it warms up, resistance on temp sensor reduces, hence more current can flow and the dash light gets brighter.
    • Got the front subframe and suspension in.    
    • If it's cold in summer, then no issue. If it's cutting out every few seconds and you're not reaching your target temp, then there's an issue. One could be the pressure switch and the other issue could be the temp probe inside the evaporator.
×
×
  • Create New...