Jump to content
SAU Community

Recommended Posts

Hey guys just wana see what yaz think is the perfect amount of balls for the street... Ill base

this on something like an R33 GTS-T. I will say something along the lines of about 240rwkw's,

second gear should brake traction for fun without clutching & scary gears like 3rd would hold

the road on most surfaces..

Give us some opinions or mabey even stories.. im bored.

Link to comment
https://www.sau.com.au/forums/topic/152649-opinions-perfect-power-for-street/
Share on other sites

well.. in turbo cars if you have 240kw at the wheels, it is also a knob away with the boost controller to lower it down to say 190kw with a lower boost level. so yea thats pretty much perfect.

you dont want to be driving around on 16psi everyday to work @ 240kw, it starts to rain then before you know it your fishtailing 3rd gear with only half throttle on cheap ass Wanli's or NAnkangs.........

so id say for street driving 240-260kw @ wheels max for street DAILY DRIVEN, as long as you have a streetable clutch and diff and GOOD tires/brakes.

Why would you want to break traction on the street? Evidently one person's fun is another person's cock-knockery.

I'd want enough power to run a relatively hard touring tyre without having to worry about undue wheelspin. Something like a Dunlop 3000A or a Goodyear RS-02.

And I'd want to ensure that I wasn't running so much boost that I'd be unable or unwilling to drive my car every day in Australian conditions, regardless of the weather.

Even just the standard bolt ons (turbo back exhaust, FMIC, ECU + EBC) would be more than adequate for the street.

Why would you want to break traction on the street? Evidently one person's fun is another person's cock-knockery.

I'd want enough power to run a relatively hard touring tyre without having to worry about undue wheelspin. Something like a Dunlop 3000A or a Goodyear RS-02.

And I'd want to ensure that I wasn't running so much boost that I'd be unable or unwilling to drive my car every day in Australian conditions, regardless of the weather.

Even just the standard bolt ons (turbo back exhaust, FMIC, ECU + EBC) would be more than adequate for the street.

I got to agree with you

I would rather a car that grips well instead of a car that spins the wheels and dosent go anywere, also a well set up car handling wise is alot more fun than a car that has lots of power but dosent handle well and cant put the power to the ground around corners,a car that you can take round the twisty's and give a nice fast run is the setup for me.

no no no your fully wrong, go fullsik 400 rwkws minimum, that should get you everywere while the fuel is in the tank, no wheelspin what so ever, put some 285's on the rear and you'll be right :)

LoL, anything under 300 is the best bet for street, any more and its just rudiculous, 250 is comfortable, but as mentioned, with the right handling supports to accomodate power is your best bet for street

also a well set up car handling wise is alot more fun than a car that has lots of power but dosent handle well and cant put the power to the ground around corners,a car that you can take round the twisty's and give a nice fast run is the setup for me.

Yeah, for the street you don't need max power. You're either driving a commuter, where you only just need enough power to make gaps in traffic when overtaking, or you want a little fun "touge machine".

For the former I think the bolt-ons on a GTS-t would be perfect. For the latter, I'd probably prefer something like a RenaultSport Clio, DC5 Type-R or MX5. They've got a reasonable power to weight, flexible engines, and with not much weight but lots of grip they're fun to throw around your favourite winding road without having to do ludicrous speed.

Honestly, an SR20 Pulsar is about as much grunt as you need on the street for great fun. The fun is in the noiuse and reving the thing without going at crazy speeds. Hell my 800cc Handivan is still the most fun street car i have ever had...it sounded cool and use to rev it hard everywhere...and was always going at speeds which didnt make me fear for my licence.

In an R32 with a bit more then std poke i cant even floor it above 4k wihtout owrrying baout speeding...no fun at all

Honestly, an SR20 Pulsar is about as much grunt as you need on the street for great fun. The fun is in the noiuse and reving the thing without going at crazy speeds. Hell my 800cc Handivan is still the most fun street car i have ever had...it sounded cool and use to rev it hard everywhere...and was always going at speeds which didnt make me fear for my licence.

In an R32 with a bit more then std poke i cant even floor it above 4k wihtout owrrying baout speeding...no fun at all

Yeah my friend was saying the same thing. In his sisters pulser he could thrash the car as much as he wanted and wasn't really doing dangerous speeds but in my gtr if you at the limiter in 3rd your at about 170km/h(i think) which is a bit scary on the streets.

you dont want to be driving around on 16psi everyday to work @ 240kw

Whats wrong with that :(

I had very badly worn Wanli's when I bought my car. Turning in the rain was always a joy. Power output was 193hp at the rears back then.

Launch out of first......hit speed imit...................hit red line, change to 5th and brake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drive beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...