Jump to content
SAU Community

Recommended Posts

are you guys sure the r33 thermo fan doesnt switch on with aircon? i thought it did. not constantly, but as needed.

Yes you are right, even R32 but i think we'd like to have the fan turn on a bit earlier than what set (factory temp set at 94degree i believe) by Nissan just to be on the secure side.

  • 1 month later...
  • 4 weeks later...
Thanks for the how to Cubes, worked a trick. But I think its a little too late for my compressor, I think the summer period has over cooked it. Oh well I have a replacement one here.

What gas are you running? Our compressors are not designed to deal with the high pressures experienced with R134a gas.

Find an aircon specialist that is licensed to deal with R12a; a MUCH better option.

I've had both gases in mine and the R12a is much better. I can no longer hear the a/c compressor roar, I can no longer feel when it clicks in and out and the power it sucks out of the motor is hardly noticable UNLIKE R134a.

R12a is a more efficient and environ friendly aircon gas than R134a.

Don't confuse R12a with R12. They are two different gases.

yeh i converted it to R134a gas and ever since then have been having probs. 2 weeks after I had it done it built up too much pressure and stopped working. They had to release some gas and it worked again for a few months then the compressor went. I'll have to get the compressor replaced and then fill it with the r12a then.

What gas are you running? Our compressors are not designed to deal with the high pressures experienced with R134a gas.

Find an aircon specialist that is licensed to deal with R12a; a MUCH better option.

I've had both gases in mine and the R12a is much better. I can no longer hear the a/c compressor roar, I can no longer feel when it clicks in and out and the power it sucks out of the motor is hardly noticable UNLIKE R134a.

R12a is a more efficient and environ friendly aircon gas than R134a.

Don't confuse R12a with R12. They are two different gases.

haha ive converted mine to R134a.

The power drain is huge, wouldnt dare turn it on whilst idling at lights :whistling: When coming to a stop, i always put it into neutral and rev a bit so it doesnt stall it self :P

haha ive converted mine to R134a.

The power drain is huge, wouldnt dare turn it on whilst idling at lights :whistling: When coming to a stop, i always put it into neutral and rev a bit so it doesnt stall it self :P

lol mine wasn't quite that bad but it made the car feel very very dull.

  • 7 months later...

i did this and it worked a treat,

also added another wire connecting it to the black side of the diode then ran the wire into my cabin with a switch that connects to ground, now i can turn it on via the switch or via the air con

Say ur radiator temp has rose a bit, just flip the switch and instantly the overheat fan will kick in and aid in cooling your radiator.

  • 3 weeks later...

has anyone tried this on an R33?

I'm about to replace my aircon fan, as mine is seized, and probably has been for some time. although the aircon is still quite good :blink:

now to work out how to get the fan out without removing the fmic :devil: . i tried, but it doesnt look possible, so i unplugged it for the time being.

Edited by Munkyb0y
  • 1 year later...

as hot weather has come around in victoria, this requires a bump up to the top :yes:

took my car to get an AC checkup and they told me to wire in the radiator fan startup.

One question, after turning off the AC is the rad fan still on? or does the wire+diode signal the rad fan to turn off?

  • 11 months later...

Yes, I would like to do this mod on my S2 R33 for this summer! Does anyone know if the fuse layout is the same as the R32's?

Also, does it actually make much difference to the air temps (inside the car) when you've just started the car and it's ultra hot outside, but you're sitting still? I'm finding that for the first few mins it never really cools down much inside if it's >35C outside and I'm not doing >40-50km/h. On the flip side, once I'm doing >40km/h would I really need this 2nd fan going whenever the A/C is on?

Oh, and what happens if the car reaches 91C but the A/C is off? Does the overheat fan stay off? Or, in other words, is the overheat fan now solely controlled by the A/C?

Edited by benro2

will be trying this mod its got 2 be 1 of the cheapest 1s out and it will give me a chance to check if my thermal fan works (i dont trust the 1 the panel beater fitted)

  • 4 weeks later...
took my car to get an AC checkup and they told me to wire in the radiator fan startup.

likewise - when i had my regas done the mechanic also advised running the thermo fan would knock off approx 5degrees from my current internal vent temp which is @ 11degrees

this is a fantastic mod, i'll do this today :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...