Jump to content
SAU Community

Resetting Ecu On R33 Gtst

jimmytim

By jimmytim,
in General Maintenance

 Share

Recommended Posts

Kinks Grand Master

Kinks

Posted
Posted
What if I don't want to unplug the battery lead?

it's far easier than shorting out your wiring harness, causing a fire, and watching your pride and joy burn to the ground.

ok maybe i'm exaggerating, but seriously.. taking the battery terminal off is by far the easiest way.

MANWHORE Grand Master

MANWHORE

Posted
Posted

I personally do not feel comfortable wiht the shorting the pin method, because I have not read that in any of my nissan manuals (someone correct me if I'm wrong, because the indexing of the manuals is very bad).

Disconnecting the battery seems to work sometimes if it's disconnected for a long period of time but I hate losing my radio stations.

Nowadays, I just use my laptop to do it. I can reset the ecu and clear the self learn.

Munkyb0y Grand Master

Munkyb0y

Posted
Posted

correct me if i'm wrong....and i know this is a long standing debate...but resetting the ecu does sweet fuuck all....apart from clearing your error codes.

the ecu learns everytime the car is switch back on. it doesnt have the capacity for long term memory of the parameters you're hoping to 're-learn'.

ive been told this by tuners, and other ppl who have technical knowledge of ecu's. and it makes total sense.

why would the ecu restrict its ability to adapt to new situations, and only work at its best when ppl with 'supposedly' inside information decide to disconnect their battery.

ive tried it, made no difference at all.

siddr20 Grand Master

siddr20

Posted
Posted

It made a difference to my car..

How?

Well it doesnt run as rich anymore..

It doesnt smell as much of exhaust fumes due to the car not running as rich..

The car actually felt a lot better once it was reset..

For me it worked. Gettin more milage.

----

Remember to dc the alarm.. Otherwise you gonna go deaf like me lol when you dc the battery..

And yup your headunit settings will be reset.

123456 Proficient

123456

Posted
Posted

I thought the wires to be shorted were on the ecu, not the fuse box.

Resetting mine didn't do anything either.. Wouldn't the ecu just be set up to react to current environments and not remember the way the weather and your driving has been for the last 6 months.. That seem's the logical way to set it up to me :(

jimmytim Collaborator

jimmytim

Posted
  • Author
Posted

BTW, can I use nissan data scan to reset the ecu?

Reading here: http://202.43.226.57/

Last item on point 4 "clear self learn", that is the one isn't it?

(maybe I'll build one and have more fun with the car :stupid: )

jeffworld2 Veteran

jeffworld2

Posted
Posted

i thought that the ecu would adjust itself to new mods quicker if you clear it, as it would adjust in large increments when first trying to learn, then smaller and smaller as it gets closer to optimum. when you change something tho, it has to use these tiny increments to get to the new optimum running...

so reset it and it starts off big again

thats my lil story :(

cowie165 Veteran

cowie165

Posted
Posted
I don't know about data scan. Its not my favourite consult software. My software can result the ecu itself as well as the self learn.

What are you using dude? At the moment I'm using ECU Talk, but I'm interested in whatever does the best job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...