Jump to content
SAU Community

Recommended Posts

A 26/30 will be less laggy then any other rb, if you could buy a "new" rb30e and put a "new" rb25 head on it, and make 160-200rwkw, there is no reason it wouldnt last 300,000 if the tune was ok. Once you want big power, it changes, but only if you start stressing things beyond their capabilities, ther are a couple of 300rwkw rb30det's on here that have lasted longer than 60,000 and showing no signs of distress. If you have 400rwkw and thrash it every day, then it will last as long as an rb25 with the same power.

Consider I bought a previously unopened RB30 bottom end. All stock. Then I got a near new RB26 head, still with stickers on the heads lower surface and had been in plastic for a while with almost no carbon in the combustion chamber. Built with H beam rods and 9:1 comp pistons, without receiving the boost it makes on the twins (basically kept atmo for run in) it makes 160rwkw.

What do stock 25's make? Wait till this baby gets 18psi.......

Lag? I don't think so!

As with any question you might ask without giving enough detail. It depends. Put a V8 Mack truck turbo on and yes it will lag, but the right turbos for the application then it will be lethal.

Consider I bought a previously unopened RB30 bottom end. All stock. Then I got a near new RB26 head, still with stickers on the heads lower surface and had been in plastic for a while with almost no carbon in the combustion chamber. Built with H beam rods and 9:1 comp pistons, without receiving the boost it makes on the twins (basically kept atmo for run in) it makes 160rwkw.

Hi Geoff, do you remember what sort of revs yielded the 160 rwkw?

Cheers

I'm not reading 260 pages worth of stuff, when from what I've read so far of it (about 10-15 pages in) is mainly people going "OMG, that's great, I plan to do that too"

It seems more of an RB30 chatter then a technical guide

yes you just run an external oil feed to the gallery from your OPS feed. T piece from either the ally heat exchanger or from the bunged hole in the block and run it to a newly tapped hole in the front inlet side of the head where you can see a tube like casting running up the head to the inlet camshaft area. Make the fitting thats in the head feeding the gallery to have about the same size hole as the std feed from the rb25 block which i think is something like 1.6mm....but im probably wrong.

Though this is probably the biggest thread in the tech section, it would definetely have the most tech info available. Sometimes the chatter is techinical :thumbsup:

Hi Geoff, do you remember what sort of revs yielded the 160 rwkw?

Cheers

Mark I don't really remember. I just asked him to tune it to start and run at 60, 80 and 100 so I could run it in.

I'll be getting the bov and boost control sorted so I can have the tune redone soon. Should be interesting. Then it's time to throw it back at the track.

BTW I'm on skype, geoff.williams89 if you feel the need to chat sometime.

Hey Geoff

Did you get the cam gears installed ?

I got the 3.5 inch exhaust done last week, just finished installing a new 10mm fuel line, with new outlet on the tank cap today also.

So booking a tune in as soon as Matts available.

Trevor at custom exhaust specialists said I should pick up 20 - 30 rwhp on same boost with the new exhaust as the old 3 inch would have been maxed out. So looking at over 500 rwhp on 18 psi. But I want to tune it until it pings on 100 ron and then back her off a bit.

Will keep you posted.

PS. Hope your gonna blow or turbo the XR8, otherwise you are going to be very disappointed with the NA V8 :-)

No I've been busy since moving into the new place but maybe later this week.

The Falcon will stay pretty stock. If I want jollies that's what the GTR and racecar are for. Never try to make a silk purse from a sows ear. The ute is for towing a boat and racecar and work.

That thing of yours just keeps getting better mate.

Thats right - I forgot about the boat. Now I understand.

No I've been busy since moving into the new place but maybe later this week.

The Falcon will stay pretty stock. If I want jollies that's what the GTR and racecar are for. Never try to make a silk purse from a sows ear. The ute is for towing a boat and racecar and work.

That thing of yours just keeps getting better mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...