Jump to content
SAU Community

Recommended Posts

I didnt think you had vvt in the 26 head?

Just out of interest have you spoken to Robbie at RIPS?

http://www.ripsltd.co.nz/

sori, vct/ yea a lil but hes a busy guy, if im not payin him i dnt think he want to help??

and its a huge toll call lol,,

thanks

go to the first page and download the pdf guide after you read that and if there are any specific questions to what your doing ask away!

the guide pretty much explains it all when it comes to what goes with what and how.

Read it carefully as i just put my motor in forgetting to do the RB25 sump mod now i gotta drop the sump off which is a bitch considering i just had the motor out on a stand!!!!!

RB26 does not have any form of VVT/VCT/VTEC

26 heads dont have vct - thats only the gheyass rb25's

my gheyass RB25 doesn't!

kool thanks, so wat do i need to block off etc?

ive neva realy been intrested in rb30s im realy stubbrn like that,, just realy been doin others,

im not going to spoon feed you, read the damn thread and pdf

It's so ghey that HKS decided to make one for the 26 and sell it for a small fortune :banana:

sif kill my bagging of the rb25 :(

one a side note, my billet girdles are ready :D

the one you see below is for the 4wd guys, it has the adapter encorporated in it. i can re-design it to make them for rwd rb30's, rwd rb26's & rwd rb20's. this also means my 4wd adapter plates are good to go aswell :D

girdle004zc7.th.jpg

girdle005qd2.th.jpggirdle006vc7.th.jpggirdle007ao7.th.jpggirdle008ep9.th.jpg

sif kill my bagging of the rb25 :D

one a side note, my billet girdles are ready :D

the one you see below is for the 4wd guys, it has the adapter encorporated in it. i can re-design it to make them for rwd rb30's, rwd rb26's & rwd rb20's. this also means my 4wd adapter plates are good to go aswell :banana:

girdle004zc7.th.jpg

girdle005qd2.th.jpggirdle006vc7.th.jpggirdle007ao7.th.jpggirdle008ep9.th.jpg

so these adapters go over the top of the standard girdle?

so these adapters go over the top of the standard girdle?

correct. the std girdle/main caps get machined down to suit.

i initially looked at getting rid of the std cast caps, but when i looked at the caps where the bearings sit, they are not round (oval shaped) and they are slightly recessed - i dont have the funds to do r&d on 2+ motors to get that style of girdle correct, but i do have the funds to do r&d on this style of girdle

Wing it.. If you haven't got half a brain to work out the problems as you come across then its best you don't do the conversion. :banana:

Get the two motors in front of you and have a look. Its all quite simple.

yea i get that, i only have the head to look at, block is at machinests waiting on wat to do,

im just tryna cut down time,,,

sorry for asking this probably been asked and answered a few times but im not reading 306 pages.. so can someone please tell me the difference between a rb30 short block and long block.. and does it matter what one i use

Long motor includes bottom end and head and all internal parts but no accessories.

short motor is same as above minus the head, includes internal parts inside the block and sump.

It's obvious what you need for the det conversion.

sif kill my bagging of the rb25 :)

one a side note, my billet girdles are ready :P

the one you see below is for the 4wd guys, it has the adapter encorporated in it. i can re-design it to make them for rwd rb30's, rwd rb26's & rwd rb20's. this also means my 4wd adapter plates are good to go aswell :P

girdle004zc7.th.jpg

girdle005qd2.th.jpggirdle006vc7.th.jpggirdle007ao7.th.jpggirdle008ep9.th.jpg

What are they worth?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...