Jump to content
SAU Community

Recommended Posts

hi there,

have u guys taken your cars to Mercury Motorsport for tuning?

i have visited their web site saying they can edit and re-tune the factory Nissan ECU.

just wonder is it worth for $330 for installing a new computer chip and pay another 2 hrs pay for the dyno tune(what they recommand)

just want to know how they play with the factory ECU...haahh

http://www.mercurymotorsport.com.au/produc...nedit/index.htm

Link to comment
https://www.sau.com.au/forums/topic/154282-mercury-motorsport/
Share on other sites

I took my old car there. It's the same remap that Dr does (they bought the software) and I made just as much power as I would have with an aftermarket ECU. After the initial $330 remap I was only charged 1 hr for the dyno, so that equates to just under $500. Bargain if you ask me!

I took my old car there. It's the same remap that Dr does (they bought the software) and I made just as much power as I would have with an aftermarket ECU. After the initial $330 remap I was only charged 1 hr for the dyno, so that equates to just under $500. Bargain if you ask me!

i was told even dr drift cant re-map the R33 stock ecu?

I've used them for

100K service (timing belt/water pump)

Pads and slotted rotors

Gearbox oil

Highflow turbo and power fc install/tune

all in all not a bad place, i wouldn't call them faultless or the cheapest but i'm reasonably happy with the work performed and i'd still go back there again.

i was told even dr drift cant re-map the R33 stock ecu?

From what I have read on this whole site nobody can, there is a thread in here somewhere? that links to this site and goes onto explain why.

http://www.ztechz.net/id10.html

Mercury can re-tune the factory ECU on Nissan's I was not aware they could do the R33, as last time I talked to them they could not.

I have known Trent for many years and thus why I took my car there. I had PFC install, walbro, GFB atomic controller (which does not spike...) installed and tuned and happy with the work. I even go my dyno printouts emailed, all 3, torque, boost and afr.

I have also heard good reports from Allstar and also bad reports from Allstar. As wil most places its personal preference. That said I am unsure where I am going to get my PFC tuned after I install my FMIC, so carry on people with the posts. oh and the install and tune cost me $500 including cold start tune the following day, total 3 hours dyno time.

i have been to mercury many a time and have had my ECU remapped by them with their Dr Drift software...

they are generally pretty expensive but do a good job on their work. i have had plenty of work done there.

there's no one else in QLD that can do the remap that they can do with the stock ECU, so telling this guy to go to allstar is kind of pointless because he would have to go out and get a powerFC to get an equivalent tune

so just do it mate and dont regret it!

I won't go back to Mercury. they told me i needed a full engine rebuild on my GTir. turns out the problem is that it has solid lifters which are stock on them, which they thought were causing the pistons to slap (which wasnt actually happening), WTF!!! my mechanic said the car was in perfect condition.

also, mercury were the ones that built that car originally, hope that helps you decide :(

agreed... another (well, many) negative experiences with mercury here.... they will never touch one of my cars again.

oh, and as for other people who can remap the stock ECU, talk to matty spry, as i believe he can do it as well.

failing that, you could fly drdrift up for another tuning tour.

Mercury gets the nod by me.

I've had my old gtst tuned by mercury numerous times. Trent and the boys are pretty helpful and u can approach them and talk about ur plans etc.

Also richard from allstar does quality work and he's a good bloke.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
    • I'm extremely suspicious of the VPP stuff. Best I can tell, you surrender any and all control of your panels and battery to the VPP, because there's no way that anyone could write a sufficiently useful set of "rules" as to how much you would be willing to let out of your export meter at any given time. If one of your main interests is to have enough in your battery every evening to get you through the night without having to import, you could easily find yourself with nothing in your battery at the end of the day, or part way through the night, and then be paying import pricing instead of paying nothing. I cannot see how this cannot come to pass.
×
×
  • Create New...