Jump to content
SAU Community

Horn Playing Up

cheez

By cheez,
in General Maintenance

 Share

Recommended Posts

cheez Mentor

cheez

Posted
Posted

hey guys

my horn honks when i turn the wheel about a 1/2 turn either way but wont toot when centre and will go off again when a full turn is done.

atm the horn is disconnected so yeh, i need to get it working, any ideas???

Link to comment
https://www.sau.com.au/forums/topic/154443-horn-playing-up/
Share on other sites
Craved Grand Master

Craved

Posted
Posted

they work by earthing a circuit within the wheel, something on teh wheel is touching the wire to make it go off

what wheel is it, have you remove the horn centre if its aftermarket, and check that the wire isnt worn and is connected correctly

Link to comment
https://www.sau.com.au/forums/topic/154443-horn-playing-up/#findComment-2872416
Share on other sites
cheez Mentor

cheez

Posted
  • Author
Posted

i have the standard wheel, air bag in it, dont know how to take it off? the horn cover that is,

wasnt to embarrassing, when it happened just opened the bonnet and disconnected the siren part of the horn.

lol.

help

Link to comment
https://www.sau.com.au/forums/topic/154443-horn-playing-up/#findComment-2875407
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...