Jump to content
SAU Community

  

55 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

I just bought a high flow turbo which I was told was a genuine bolt on job. Being fairly new to the scene I thought that bolt on meant it was pretty much a straight swap ie. no stuffing around with oil and water lines / fittings. Instead I get a turbo which isn't even close to being a straight swap. None of the stock oil/water lines match up and the turbo needs to be "clocked" so it matches up with the stock air inlet.

These are all questions I should have asked before I got the work done, isn't hindsight great.

Anyway, I just wanted to see what other peoples ideas of "bolt-on" were.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/155503-whats-your-idea-of-a-bolt-on-turbo/
Share on other sites

well bolt on is.. straight on no mods.. custom is doin something different to make it work..

when u have to get new lines or something like that u cant classify that as straight on.. ur mucking around...

Tis bolt on if your engine can handle the turbo upgrade..

a turbo that requires some bolting requirements

LoL..

Is the HKS GT-RS kit with the oil water lines and all fittings and shit.. is that classified as bolt on? cos everything is designed to fit like the turbo and oil n water lines in the kit?

I just bought a high flow turbo which I was told was a genuine bolt on job. Being fairly new to the scene I thought that bolt on meant it was pretty much a straight swap ie. no stuffing around with oil and water lines / fittings. Instead I get a turbo which isn't even close to being a straight swap. None of the stock oil/water lines match up and the turbo needs to be "clocked" so it matches up with the stock air inlet.

These are all questions I should have asked before I got the work done, isn't hindsight great.

Anyway, I just wanted to see what other peoples ideas of "bolt-on" were.

Cheers

bought off who?

i class it as 1 that you attach with bolts, rather than with say, glue or zip-ties.

but seriously, i would class it as oil and water lines screwing straight in, even if the oil line has to have 1 of the fittings drilled out to let more oil through (e.g. a slide highflow). and most importantly that it bolts up to your manifold.

Bolt on = bolts onto the stock gear.

Manifold, dump, intake pipings

If you need to mod a oil/water line, big deal. Its really not that hard.

I wouldnt count oil lines depending on the type of turbo (covered further on)

As for the turbo being "clocked" what you do mean?

One of the housings rotated? If so, thats pretty much gonna happen on any turbo as no-one is going to get it perfect for your car

Also depends what types of turbos (as i said earlier) ie Bush --> Ball bearing and vice versa.

If thats the case where your changing from one type of turbo to another (and reason for the oil/water mods) then its a bit of buyer research aswell as the seller IMO.

Two way street on that one as an owner you should really take a little interest in what they are purchasing :(

Can you give more details?

Type of turbo you had, type of turbo you have change too? etc?

Would kinda help us to give you a better idea maybe :)

The product is a direct competitor with the GCG highflow. Stock turbo to ball bearing highflow.

It was explicitly stated that no modifications to the stock lines were required. The only change needed was to change the banjo bolts (not the entire fitting, just the threaded part) because the thread on the new core was different.

The reality is the oil and water lines need to be changed, the oil drain needs to be modified and the wastegate actuator needs to be modified. The fittings provided look like they are designed for rubber hoses and as such, are completely useless.

I personally wouldn't call this a bolt on affair.

Thanks for the input.

Edited by Ol_Mate

if that is the case then it isn't a high-flow, it is a whole new turbo. it obviously isn't using the stock housing, otherwise it would just bolt back up.

i'm not aware of any other high-flows that use ball bearing other than the GCG. i know slide's are a bush bearing and it needs the hole in the banjo line drilled out to let more oil in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...