Jump to content
SAU Community

Recommended Posts

Hi guys, I finally got around to getting my guages installed.

Full credit goes to Maroun(spelling) & the boys down at Race Solutions in Penrith.

Has anybody installed an autoguage A/F ratio guage that has the warning light? I need to know how to turn off the warning buzzer as it's really starting to tick me off. The instructions say to refer to back page but there was never a back page when I bought lol.

post-29425-1171276040.jpgpost-29425-1171276114.jpgpost-29425-1171276329.jpgpost-29425-1171276396.jpgpost-29425-1171276460.jpg

Edited by Yo-Yo
Link to comment
https://www.sau.com.au/forums/topic/156040-just-jap-autometer-guages/
Share on other sites

I have to say, that install looks awesome mate :laugh:

Cheers! :)

As I said before, Full credit to the team at Race Solutions (next to HITMAN) in Penrith.

It was a bit complicated to get them fitted, the stock guages are a single piece with a flat window that sits behind the pod holes. They had to make a custom mounting bracket to fit them properly.

I'm very pleased with the result :D .

how come u didnt match em? they look crazi dont get me wrong but i would of matched em all.

how much did u pay for em all was thinkin about upgrading aswell

are you serious? If you look at the pictures it seems like the A/F guage changes colour...

PS awesome install and guages, ordinary pictures! :D

are you serious? If you look at the pictures it seems like the A/F guage changes colour...

PS awesome install and guages, ordinary pictures! :D

The original pics are about 2-3 megs lol :laugh: Some people still use dial up you know :)

how come u didnt match em? they look crazi dont get me wrong but i would of matched em all.

how much did u pay for em all was thinkin about upgrading aswell

Thanks for all the replies Guys. Keep 'em coming.

Andru, they are all the same colour, I'm guessing the a/f guage turns red when the warning light goes off a certain number of times. Maybe it's to distinguish that guage to let you know something funny is going on. Don't know why it turned on, The engine was off & had the car on ACC :O only happened once so far.

Cost of install all up was $450. Worth it when you consider the final finish of the install & the fact that there was a bit more customisation compared to a regular guage install.

Cheers everyone! :dry:

Love the gauge carrier....do they do one for the R33 ??

That's the stock centre console guage cluster for the r34. You could probably buy a triple guage cluster & mount it in a similar position, but it won't look as good.

A defect in NSW too if the guages go above the steering wheel I think (Edit, Just read you're from the UK lol)

Edited by Yo-Yo
  • 5 months later...

Its probably doing it because your engine was off. I have the same A/F guage, except without the warning light. If the engine is off, the reading will obviously be low. If the engine is on, and the reading is still low and the warning light on, then I'd say you o2 sensor is gone. Thats what happened to me when I had mine installed. Once the o2 is changed, its all good :thumbsup:

Good luck... great looking install :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...