Jump to content
SAU Community

Recommended Posts

First let me say that I bloody love Skylines but I don't know much about engines. And now I'm borderline friggin suicidal.

I recently bought a beautiful R32 GTS4 Skyline with a RB26 GT-R running gear. I was having heaps of fun with it until a fateful day last week when on the way to the beach all of a sudden the car started revving high without power transfer to the wheels. I pulled over and the car wouldn't start again, making a horrible clunking sound when I tried.

I have finally got the car towed to a mechanic that deals with Skylines - R E Customs in Springvale. He tells me the engine is not holding any pressure, and will need to be taken out and completly taken apart to find the problem.

He tells me one of these 'engine rebuilds' is likley to cost me between 5 and 20 grand!!

Does anyone know if I can trust these R E Customs people?

Are they the best person to go to for this sort of thing?

How much should I expect to pay for getting the engine taken out and looked at?

Why did this have to happen to me?

Link to comment
https://www.sau.com.au/forums/topic/156212-please-help-me-need-advice/
Share on other sites

RE customs looks after many members here (including mine).

I have not heard any bad things about them (against forum rules to criticise businesses in open forums on this site anyways)...

So in my opinion they definately can be trusted.

GTR engine rebuilds, i think every1 knows, are very expensive!

the rest of the Q's i cannot answer.

you will be looking at easy 5k upwards...

No oil pressure? or no pressure at all? rings hav shat themselves, melted pistons, oil pump finished which may have rooted engine.. Many reasons.

I'd say you'd be looking at about 1500-2000 to have the engine pulled out and looked at. Though normally they should be able to tell you the exact nature of the problem and have a good idea as to whats causing it without pulling it out. To me "not holding pressure" isn't a valid explination of the problem. Sounds more like you've broken something internally.

As to rebuild prices, if the bores are still good and you only do a basic rebuild to get it running i'd be expecting to pay about 4-5grand all up. but while the engines out you may as well do some bits and bobs to it, well worth it in the future. For a good engine rebuild i'd say about 15g's getting someone else to do it....

Does anyone know if I can trust these R E Customs people?

Are they the best person to go to for this sort of thing?

How much should I expect to pay for getting the engine taken out and looked at?

Why did this have to happen to me?

1) A simple search would tell you a lot of members use them, and are happy with them.

2) Depends on what you want.

3) $1500

4) Because thats life

thanks for your help guys. though i must say it seems a bit dumb that with the forum rules if RE customs WERE rip-off merchants you couldn't tell me about it.

this is what i gathered

1) it should cost about $1500 to take it out and figure out the problem - but about $5000 all up to fix it

2) R E Customs dont seem to be a shady operation.

3) might be worth getting the engine looked at while its out. but thats gonna cost more money.

two more questions:

if i do get it taken out - is there anything obvious (and reletivly cheap) I should get upgraded while it is taken out? new turbos are what $5k? is there anything else easy I can do to increase performance while leaving it street-legal?

what the hell is tuning? and should i get it done?

thanks again

Edited by don1

oh yeah i got another question a little off topic

is there somewhere good i can read about how skylines/turbos/motors in general work and what all the bits mean - or do you just pick it up over time?

im not stupid, and i am technically minded (ive done a degree in electrical engineering) but i dont have fcks clue about how a engine works and what all the bits are

though i must say it seems a bit dumb that with the forum rules if RE customs WERE rip-off merchants you couldn't tell me about it.

Piece of advice.

Flip the coin over, and take a look at good look at it.

If you still dont understand it, then dont comment on it :ninja:

is there somewhere good i can read about how skylines/turbos/motors in general work and what all the bits mean - or do you just pick it up over time?

The Forced Induction section :ninja:

I've looked after it for nearly 4 years now.

It has absolutely everything. There isnt a lot that is not covered in there these days

new turbos are what $5k?

A new pair of garret 2860-7's should cost you about $2.5K which is all you will need unless you want to get some 2nd hand stock ones for $800 or something.

But as a rule a good RB26DETT rebuild you should allow $10K for. I think for a rebuild with all factory parts will be around $6K.

If you still dont understand it, then dont comment on it :rofl:

check

The Forced Induction section :ninja:

I've looked after it for nearly 4 years now.

It has absolutely everything. There isnt a lot that is not covered in there these days

rockin'. thanks mate

Mate u can trust RE Customs Ray is a top guy and will help you out as much as he can.... You have decided to take the car to the right place....

Good luck with your repairs.

thanks man

A new pair of garret 2860-7's should cost you about $2.5K which is all you will need unless you want to get some 2nd hand stock ones for $800 or something.

But as a rule a good RB26DETT rebuild you should allow $10K for. I think for a rebuild with all factory parts will be around $6K.

so a basic rebuild where they just take it apart, clean it and put it together again is ~$6k - but if i want all fancy parts put in I would be looking at ~$10k? Are garret 2860-7's more powerful than the stock RB26 GT-R turbos?

also I'm thinking about an A'PEXI PowerFC. one of those (with installation) am I to understand is about $1.5k? I'd also probably have to get the car tuned for it right? which would be more again.

god damn this shit is expensive.

if ur looking at a turbo upgrade ud b looking towards getting a powerfc to make use of it

just remember u will have 2 run the engine in to start with anyway b4 u do 10 sec passes or wateva. but ray will tell u that anyway.

powerfc - 1k. then est bout 400-750 to tune it

btw im sure ray will do a better deal on labour with the more work u have done ;) most places do

gtr turbos are piss poor.. anything is better really altho the stock ones can make close to 300awkws

check

rockin'. thanks mate

thanks man

so a basic rebuild where they just take it apart, clean it and put it together again is ~$6k - but if i want all fancy parts put in I would be looking at ~$10k? Are garret 2860-7's more powerful than the stock RB26 GT-R turbos?

also I'm thinking about an A'PEXI PowerFC. one of those (with installation) am I to understand is about $1.5k? I'd also probably have to get the car tuned for it right? which would be more again.

god damn this shit is expensive.

'installing' a powerFC takes all of about 2 minutes....it should cost $0.

'installing' a powerFC takes all of about 2 minutes....it should cost $0.

Possibly safe to say 1.5k will cover install the unit and also a tune...

regardless ppl have to make a living cant do it for nothing even if it does take about 2 mins dezz

I have finally got the car towed to a mechanic that deals with Skylines - R E Customs in Springvale. He tells me the engine is not holding any pressure, and will need to be taken out and completly taken apart to find the problem.

My knowledge of engines is rather small so I may be completely off the mark, but if there is no compression could it be the head gasket? That would explain it not starting. Depending on the damage done I cant see that costing the amount mentioned if thats what it is. Most cars to fix a head gasket would be between $1-2k. Being an RB26 it will be more, but not in the $15-20k mark like you mentioned.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...