Jump to content
SAU Community

Recommended Posts

Hey all, i need to clear an EPA notice in the next couple of weeks and my car is pretty much stock (R33 GT-R) except for a 3.5" turbo back exhaust. I've been told by Daalder in Dandenong (who do EPA noise testing too) that there's no way it'll pass cos even the stock exhaust barely passes in most cases.

Anyone got any ideas where to source a stock exhaust system? I've tried calling RE Customs and Racepace and a couple of local Jap/Import wreckers, I should hear back from them by tomorrow morning, but is anyone on here able to help, maybe you have one?

turbo timers have no use, my friends don't have 'em etc etc etc....

incorrect ash... with a turbo timer, you can put the windows up AFTER you have taken your keys out and realise the windows are still down... true story...

:O

  • 3 weeks later...

Hey lads, ive done a search havent found much on what im looking for; which happens to be for an engineer who can gimme a certificate on an intercooler hole, which is now welded up! ive gone to vic roads site n from there list rang a few but failed to find a suitable one! Was wondering if there was a recomendation or an engineer on here who can help me out!

Thanx

-Az

ahh shiet thats un luckly sounds like a pettit effort.. someone on here will know for sure.. i heard someone in bayswater but no idea.. try create a thread in vic cos searching will take ages

yep it was a pettit effort indeed! Yer checked the vic roads site that list most of the guys i rang couldnt do it ...whether be airbag or dont do coupes..was wondering if there was an engineer SAU usually goes to when in trouble, Non the less thanx lads i shall keep looking!

thankz

-Az

yep it was a pettit effort indeed! Yer checked the vic roads site that list most of the guys i rang couldnt do it ...whether be airbag or dont do coupes..was wondering if there was an engineer SAU usually goes to when in trouble, Non the less thanx lads i shall keep looking!

thankz

-Az

Oh airbag... good luck mate, i don't know anyone that will signoff on that.

you'll have to ring everyone on that list

Yer airbag is abit of a problem! Can u just remove the airbag? Non THe less i shall keep trying! @ alr33x yer mate...look @ the delema im in! go turnflow n u wont have to spend ure life looking for an engineer!

thanx guys

-Az

I'm curious to know if the EPA inspectors will pick up different low mount turbos on a gtr. Say garrett -7s or -5s or similar hks. I know your not suppose to have them but it's kinda hard to tell. If they are able to pick them, would they be likely to give u a hard time if u changed them back to stock but used r34 gtr turbos on a r33 gtr? I can get r34 turbos off mate if I'm likely to have to change the turbos over. Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...