Jump to content
SAU Community

Recommended Posts

i just got my new 33 s2 im the first owner in australia and it has a really dark tint on the back windscreen and back side windows.

its so dark that you can put your hand against the inside of the back windscreen and from the outside you cannot see a thing, you cannot see my p's either. night driving and reversing is a nightmare.

anyway a friend told me that if i stacked it the insurance company wouldnt pay out because the windows are too dark to meet standards ect,ect.

is this true?

also, does anyone know if i can get it removed? if so roughly how much.

cbf googling and asking for online quotes, cheers

Link to comment
https://www.sau.com.au/forums/topic/160197-very-very-very-dark-tint/
Share on other sites

Goto a window tinting place they'll remove it for you for around $50.

Replace the tint with something lighter and they'll probably do it for you for free.

Removing tint is pretty easy with a razor blade, heat gun and goo remover (or eucalyptus oil), but doing a rear window has obvious problems that's better left to a professional (heater grid in the window scraping off).

As for the legalities of the tint, it is legal as far as I know, I think your rear windshield and rear windows are excluded from the 30% tint law. Its only your driver and passenger window, plus windscreen that are illegal if tinted too dark. Cars with two different tints look ridiculous IMO, and if its giving you grief reversing or parking, get rid of it.

I would be extremely suprised if an insurance company was to decline a claim based upon illegal window tinting on a vehicle. That would be insanely stingy!

I know a bloke who got rejected because he had 2 chaser rims on instead of the factory alloys he specified in his policy. (Luckily it was not a major claim and not worth taking to court).

Insurance companies will do anything to not pay up. Anything that is deemed to hinder your driving and illegal will most certainly be used against you in a claim. Its not worth leaving up to chance.

If you want it gone, you can remove it yourself.

Get a spray bottle, fill it with water.

Spray the tint with water and cover it with a black garbage bag.

Leave the car sitting in the sun.

It should steam itself off.

However, it seems a bit odd that it would have passed compliance if the tint is "too dark".

Does SEVS compliance look at tint? I thought it was a roadworthy thing? Even still, you would have needed to get a roadworthy to rego it so yeah.

I suppose technically insurance companies CAN choose not to pay you out, but if they actually do or not is another matter.

It's really just a risk that you take.

The same applies if you plan on doing other 'illegal' mods to your car (they may not pay out).

You'll get used to night driving and reversing, you've probably started to use your side mirrors a lot more?

I would be extremely suprised if an insurance company was to decline a claim based upon illegal window tinting on a vehicle. That would be insanely stingy!

yeah i mean what sort of insurance company would refuse a claim because you have an illegal modification that reduces visibility....... :laugh:

yeah i mean what sort of insurance company would refuse a claim because you have an illegal modification that reduces visibility....... :w00t:

What I really meant is that it would be very improbable that an insurance company would decline a claim based upon dark tint on the back/rear windows. Especially since that it is unlikely to have caused an accident in the first place.

they can and most likely will decline the claim if the dark tints caused or were part of the problem for example if u reverse into sometihing or if you hit another car while changing lanes as u cant see ur blind spot... if i was u i would get them removed and get tints to match ur front ones...

exactly, who drives out of their side and rear windows - hardly cause an accident.

Get T-Boned on a road that bends around towards the back of your car and they won't pay guaranteed.

It doesn't matter if you're using an inch of your rear side window or the whole thing. If they can deem that any of the window obscured your vision, then they have reason to reject your claim.

I don't know about you, but it's pretty common for me to glance out my rear side windows whether it be changing lanes, at intersections, reversing, parking etc etc.

my 32 came with a uber tint aswell, at night looking out the back window you could see nothing but dim lights. That being said it DID pass roadworthy (smelled dodgy) but i took it off asap as it was impractical as hell.

they can and most likely will decline the claim if the dark tints caused or were part of the problem for example if u reverse into sometihing or if you hit another car while changing lanes as u cant see ur blind spot... if i was u i would get them removed and get tints to match ur front ones...

That's about right.

Otherwise I think you could safely run the gauntlet. Being in the industry I can't say I've ever heard of a claim declined based on window tint.

Agree with ScorpGTX.

But yes, Of course changing lanes or reversing/blind spot etc through dark tint can deny a claim, once again depends on insurer. However as I said before - if its not the cause of an accident, highly unlikely a claim will be declined just because of tinted windows.

E.g - If someone hit you, as they failed to give way at a give way sign, and you have that tint, your car isnt going to be covered?

Or

For some unlucky reason you missjudged braking and ran up back of someone, did the tint cause that and are they going to deny claim because of tint?

highly unlikely.

FBI tint is standard (or perhaps factory option) on the cars in Japan. That's how they come from factory, don't ask me why.

No legality issues for the windows the tint is on. That's why it's not touched during compliance.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...