Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering is it a good Idea to use Nulon Petrol Injector Cleaner (Add to the petrol tank) ? im bit sacred that it might harm the engine or something like that. I will use anything on my old toyota corolla but for my skyline r33 gts4 (Rb25DE) have to be carefull. If this stuff harm any part of the car smply I wont use it, just need to know...any feedback?

By the way my car is consuming lot of fuel so im in the process of changing the o2 sensor, cant find the correct one for RB25DE non turbo model:(, thinking if this Nulon Petrol Injector Cleaner is safe it might improve the fuel eficiany a bit!!!!!!!!!!!!!!

Cheers

Chinthana

Hi Guys,

Just wondering is it a good Idea to use Nulon Petrol Injector Cleaner (Add to the petrol tank) ? im bit sacred that it might harm the engine or something like that. I will use anything on my old toyota corolla but for my skyline r33 gts4 (Rb25DE) have to be carefull. If this stuff harm any part of the car smply I wont use it, just need to know...any feedback?

By the way my car is consuming lot of fuel so im in the process of changing the o2 sensor, cant find the correct one for RB25DE non turbo model:(, thinking if this Nulon Petrol Injector Cleaner is safe it might improve the fuel eficiany a bit!!!!!!!!!!!!!!

Cheers

Chinthana

shouldnt harm the engine i wouldnt think

I found form experiance that REDLINE SI-1 Fuel Cleaner is the BEST. It is sooo good it cleaned some of the carbon build up from the top of my cylinders.

$26 at Bursons, it is a heat activated agent, really does work well.

I used it in my R33 when i used to get slight flat spots and worked a treat... just reset your ECU when you fill it with premium fuel... i was getting 400kms to a tank in my R33 (nanny shifting) and now getting 700kms to a tank in my N16 Plsar Q lol

The Injector cleaner won't do anything that a lot of high-octane fuels won't. A lot of fuels these days carry detergent to clean up your injectors etc, while the engine is running. I can't imagine it would do harm though, so if you want to spend the money then do so. Personally I wouldn't bother.

You are right to question the safety of this product. I have lost count of the number of people who have had pistons melt as a result of adding Nulon Petrol Injector Cleaner to their fuel.

I used it once with an RB25DET Neo, no effect.

A few occasions with an RB30E I noticed an ever so slight improvement in response, but no effect on power or economy.

So I've come to the conclusion that the RB30 being 250,000-odd kms old had dirty injectors.

The RB25 being 50,000km old was nice and fresh and was always run with decent fuel, thus it didn't need injector cleaner run through it.

Correct me if I'm wrong, but I'm under the impression that the way the injector cleaner works is that it alters characteristics of the fuel which causes it to burn hotter, which in turn burns away some of the crap off your injectors, thus cleaning them. So if all you're doing is cleaning off the little deposits of crap on them, then you wouldn't really get much if any noticeable change. If your injectors are really dirty or blocked then the only way to clean them up to remove the injectors and have them properly cleaned.

Whatever your situation, I seriously doubt it's going to give you any more starting line oomph in the traffic light GP :P

Correct me if I'm wrong, but I'm under the impression that the way the injector cleaner works is that it alters characteristics of the fuel which causes it to burn hotter, which in turn burns away some of the crap off your injectors, thus cleaning them.
The injector is not exposed to the flame, so, yes, consider yourself corrected.

The principle of the injector cleaner is to dissolve bits of resin and crap off the needle of the injector, so that the spray pattern isn't disrupted. And so that the injector always closes completely, preventing excess fuel leaking into the cylinder. Unfortunately it's not always successful. It usually works best in maintaining the injectors after an ultrasonic clean.

You are right to question the safety of this product. I have lost count of the number of people who have had pistons melt as a result of adding Nulon Petrol Injector Cleaner to their fuel.

oooooooh really, I just add this stuff this morning and filled with Shell V power full tank. Are you serious, pistons get melt becasue of this stuff? ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,But how does this possible?

Thanks a alot for your replys gusy, let you know if I see any diff. So far no different yet as you guys already mentioned.

Cheers

Chinthana

i have used it before

no problems whatsoever with the driving characteristics

i acutally used it quite concentrated once and i could feel my idle smooth out ever so slightly. palcebo effect? maybe. but i thought it was significant.

but when it was in my tank i drove very sedately, given i wasn't sure how it would change the characteristics of the fuel and how it burns etc.

  • 2 weeks later...

the only time iv seen injector cleaner work was in my dads taxi lol, he drives it on LPG alot and after a while his injectors became very dirty and when he drove on petrol it would run like shit, a bottle of injector cleaner in a full tank fixed everything :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To expand on this to help understanding... The bigger/longer the block is, the more it's going to work to sit on your far away high areas, and not touch the low stuff in the middle. When you throw the guide coat, and give it a quick go with a big block, guide coat will disappear in the high spots. If those high spots are in the correct position where the panel should be, stop sanding, and fill the low spots. However, using a small block, you "fall off" one of the high spots, and now your sanding the "side of the hill". Your little block would have been great for the stone chips, where you only use a very small amount of filler, so you're sanding and area let's say the size of a 5/10cent piece, with something that is 75*150. For the big panel, go bigger!   And now I'll go back to my "body work sucks, it takes too much patience, and I don't have it" PS, I thought your picture with coloured circles was an ultra sound... That's after my brain thought you were trying to make a dick and balls drawing...
    • Oh I probably didn't speak enough about the small sanding block for blocking large areas.  In the video about 3 minutes in, he talks about creating valleys in the panel. This is the issue with using a small sanding block for a large area, it's way too easy to create the valleys he is talking about. With a large block its much easier to create a nice flat surface.  Hard to explain but in practice you'll notice the difference straight away using the large block. 
    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
×
×
  • Create New...