Jump to content
SAU Community

Recommended Posts

Hi every one im Bianca

Just bought myself a white 33 gtst today after selling my wrx

loving her so far, mods are listed in my signature

just moved to brissy at the stat of the year with my partner (sinistagtst lol) so dont know many people up here yet so if you see a white 33 with the plates 828 klm with a little blonde behind the wheel give me a wave lol

this is my new beast

cutdown.jpg

we stopped for petrol and de-riced 20mins down the road with the coppers pulled up next to me going :down: while they were filling up...no more ghey stickers for me lol

Edited by miss_sinista

Hello Everyone!!!

My name is Richie , i am new to this site and live on the Gold coast.

I own a R32 GTR and a VL 26/30

Hope to catch up with some of you guys on the cruise days. :)

Edited by richie$$$rich
  • 3 weeks later...

hi im jay, i own "GOT04" r33

its mainly built for QR sprints but still driven on the road a few times a month, seem to become less and less these days as i get more serious... lol

ive basicly touch every area of the car but theres plenty more to go

for a feature of the car click here-

http://www.clubhighrollers.com/forums/inde...?showtopic=1527

look our for it in HPI mag in a few months and its got a feature on tunerzine.com also

stay safe, wave if u see me

post-19157-1211357422_thumb.jpg

post-19157-1211357429_thumb.jpg

post-19157-1211357437_thumb.jpg

Edited by flyline

Hi guys- Mitch from the gold coast

Picked up a S2 stagea with R34 front end conversion as my daily- RB25DET, AWD and the convienience of a wagon:

img0040uo0.jpg

img0018pj7.jpg

And my weekend toy is an Evo 6RS:

2878714110103361496IbLARy_fs.jpg

Hope to meet some of you on a cruise or @ the track :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...