Jump to content
SAU Community

Recommended Posts

Hi peeps,

Does anyone know where can I get this type of Manifold ? (to suit RB20)

manifold-1.jpg

Cheers

Ford

thats a greddy flop to suit RB25, i hope they have fixed the coolant passage water injection from those copies now :D i have seen at least 5 hydro'd engines from them now.

but seriously hypertune and so forth do fabricated plenums for rb20 from memory.

Ebay Link 1 is what I have on the way. Best design I have found thus far. Uras, didnt Trust make an RB20 one yeons ago???

nah cause twentys are gay :D

haha kidding. is yours making noise yet? when we going for a test drive.

nah cause twentys are gay :laugh:

haha kidding. is yours making noise yet? when we going for a test drive.

HRMMM strange, I vaguely remember seeing a picture of one on the R31 House site a while back (translation wasnt too good, but ah well)

Mine goes broom broom just after easter (I HOPE), Ill have to give u a ride, personally Im scared :rant:

thats a greddy flop to suit RB25, i hope they have fixed the coolant passage water injection from those copies now :laugh: i have seen at least 5 hydro'd engines from them now.

but seriously hypertune and so forth do fabricated plenums for rb20 from memory.

i have one of these wat you mean buy that wanna make sure before i put it on

i have one of these wat you mean buy that wanna make sure before i put it on

im based in melbourne and got called out to a workshop (remain unamed) to investigate genuine greddy plenums (turned out to be copies) hydraulic locking engines...... it turned out that a whole batch of these copies landed in melbourne and the manufacturer had tapped thru the water passage into the intake runner.... nice work. just pressure test the water passge if your worried.

Edited by URAS
Unless its a pretty wild RB20 then dont bother. The std plenum seems to work really well for the sort of power you are going to get out of a 2L 6 cylinder. Spend all you rmoney on good quality bits, mainly turbo and a good tuner and you will get good results

+1

  • 2 weeks later...

plenum.jpg

Got this today....Its a KU Engineering one....Friggin top notch welding and design....Im stoaked...Should go nicley.

EDIT: Its really shiny too just my camera sucks the fat wang! (not that shine does anything for its performance) Also its fairly thick - the chamber, not just my old fella :happy: so it shant have problems leaning out a rear cylinder. But time will tell..

Edited by Wheezy
Unless its a pretty wild RB20 then dont bother. The std plenum seems to work really well for the sort of power you are going to get out of a 2L 6 cylinder. Spend all you rmoney on good quality bits, mainly turbo and a good tuner and you will get good results

couldnt agree more with Roy, i make 366.3hp (on two diferent dynos one in shootout mode) and still have more room to play, only real benifit you'll get is shorter pipe work.. spend the money elsewhere

HEHE Luckliy the figures that I'm chasing are higher. I totally agree that on pretty much any RB20 its not necessary, but it does get rid of alotta pipes and hoo ha when you wanna get to something on the engine :happy:

OH, and if youve spent the money everywhere else and am stubborn like me and wanna stay RB20 then go for eeeeeettttt

Edited by Wheezy

What power are you chasing from the RB20? It will be interesting to see what power it makes with the plenum. Be great if someone could do a before and after with the plenum...i would except i just experimented with my engine at some expense only to put it back to the way it was so im shy about trialling anything for the time being

I'll want to do the b4 and after thing with my rb20 after its all run in and going properly with the plazma man plenum just to see if there are any gains,but thats a while off just yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...