Jump to content
SAU Community

Recommended Posts

I've lost my licence for 6 months. I'm not writing this to have a whinge but I wish it didn't happen

Basically I'm working in Horsham at a high voltage terminal station, 3.5 hr drive to melbourne and I had to be back for my traineeship graduation at 10am. I was meant to start that day at 6 with all the other guys I work with, hook on a trailer and get back to melbourne. The guys that have the key to the terminal station got drunk the night before and didn't get to work on time. I tried to call and wake them to no avail. So at about 6:20 I drive round to all their places to wake them up and get keys. The 3rd guy I tried was just awake so I hooked on the towball from his car and get the keys, race out to the terminal station, let everyone else in, get the trailer and blast back to melbourne. I left about 6:50 i think so well behind.

I'm driving fast to try and make up time and I get just past Ararat and I'm booked for 142 in a 100 zone as I pass a truck and car. Cop got me on the radar, not much I can do. 6 months loss of licence, 6 points and $387.

I just make my graduation about 20 mins late and about 2 mins after I arrive I'm called up to recieve my certificate from the CEO of my company, little did he know about the drama I had getting there! Just made it!

I went and saw a lawyer and he basically said I had no chance of challenging it whatever way I try to get around it. just for a quick 30 min session it cost me $145!!!

I really should have just left and stuff the guys cause they slept in. Easy to say now but I tried to please everyone and I got screwed. It wasn't worth it.

Anyway that's not the end of the story cause the copper gave me 6 weeks to pay the fine but said nothing about when I lose it. So to clarify, I went the the Ararat cop station to find out. Another cop said that it was the same date that I pay the fine so 29th March. Sweet, no problems.. Until yesterday (27th March) when I went to get a new licence card issued to me (lost my wallet) and the lady says 'your licence is suspended, can't give you a card'. Apparently on their books I lost it 15th March, 28 days after the day I was booked. So 2 cops fail to tell me the correct day I actually lose it and I'm still driving thinking it's all good, 2 weeks to go. That's 2 weeks I'm unlicenced, uninsured etc. Lucky I didn't get pulled over although I would fight it all if I was.

I'm just sick of it all... Bring on september!!!

Can I still drive motorsport events without a current road licence? I'll just need someone to drive my car there!

Link to comment
https://www.sau.com.au/forums/topic/162264-so-yeah-6-months/
Share on other sites

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

awwww shit. Sorry to hear Russ. Hope your mates appreciate it. Anyways, think of all the money you can save by being off the road, and how much better your cars gonna be when you get to drive it again.

That's the plan. Look out DECA!!!

you have an r32? thinking of selling? ;)

Yeah 32 but I'm not selling, I couldn't get anything this quick for the money.

whats the fine for driving while your license is suspended?

Too much. It's not really the fine I'm worried about, it's the court case and extended loss of licence, and if I'm in a stack, even if someone hits me, I'm screwed. And in a work car my job would be in jeaperdy.

I've thought about it, just not telling a soul, drive boring cars and pass the time but I decided it wasn't worth the risk.

Bad news Russman.

I wsa workng n Horsham for 1 days late last year. Did a few trips to horsham & each time I saw a speed camera car on side of FWY as well as a TOGgy wih a hairdryer, prob 10 k's the Horsham side of Ararat. He's a guarantee out there!

Those travelling out there... be warned.

Edited by Mean_R34

BRING ON SEPTEMBER MATE!! HAHA

I get mine back in september after 1.5yrs so keep your chin up it aint that bad!

I am only 19 so as you can see my license didnt last very long. In that time ive owned 2 r33's and just work on your car and shit and time will fly past

i get mine on SEPETEMBER 27TH WOOOOOO

Damn Russ, sorry to hear buddy ;) . I travel all over the place too (just went to Hamilton and back in a day, today), and have long decided it is not worth speeding for work, in more ways than one.

Maybe we could work something out for DECA, etc. I have a licence/no car and you have a car/no licence :laugh:

Wow, so many without licences!

Bad news Russman.

I wsa workng n Horsham for 1 days late last year. Did a few trips to horsham & each time I saw a speed camera car on side of FWY as well as a TOGgy wih a hairdryer, prob 10 k's the Horsham side of Ararat. He's a guarantee out there!

Those travelling out there... be warned.

I always see the cash cameras but they're easy to pick. I've been working there for 6 months and until now, never seen a cop car with a radar outside of the small towns.

bad luck mate. Sucks arse

Which comany do you work for? Is that a SP-AusNet HV TS?

Yeah it's a SP Terminal, I work for Powercor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...