Jump to content
SAU Community

Arc Intercooler For R32 Gtst

Beer Baron
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

Hi Guys,

I have for sale a genuine ARC intercooler for R32 GTST. It's the side mount intercooler, model number MO75HR32G03 and cost new 98,000 yen + postage or around $1200 delivered. It's used and in fair condition. It could use a good clean up but it's in fine, functioning order. It's 70mm thick. These mount down in your factory intercooler duct so there are no extra piping needed, and no problems with the law. They flow enough and cool enough for around 200rwkw but people have been known to make more. These are a great stealth upgrade and replacing the factory intercooler is a must when increasing the boost on a GTST. I'm asking $350 for it. These don't come up very often and I've had this one for about 8 months, but never fitted it as I was still running stock boost. Now that I've sold my GTST I don't need it anymore. Postage is ~$15 or pick-up in sydney northside. I don't have any pics handy, but it's nothing flash to look at, just an intercooler with an ARC tag on the top and HCR32 written on it next to a serial number.

Link to comment
https://www.sau.com.au/forums/topic/163007-arc-intercooler-for-r32-gtst/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

Thanks mate. Yeah ARC are the best in the business. had a few people sniffing around but not firm takers yet. save yourself the hassle of a FMIC, and the weight, and the piping. This gives awesome performance, is a piece of cake to fit and cheap too! can't go wrong.

  • 2 weeks later...
Mr R32 GTS-T Contributor

Mr R32 GTS-T

Posted
Posted
I can't believe no one wants this. I'll drop the price down to $320.

will this make any benefit to my stock as a rock rb20det (apart from pod filter) as i am in a huge dilema to either get a front mount and up the boost or go for something as ur offering. so much debates on these forums re intercoolers re brands power gains yes or no etc im going nuts.

waht mods did u have on ur rb20det if u wouldnt mind making 200 rwkw cause i want that figure no more prob a bit less. and if this intercooler can handle 200rwkw then im interested.

thanks

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

yeah it's fine for 200rwkw. that's about as much as I'd go with a side mount though. but it could probably handle a bit more without being a restriction.

my GTST was pretty stock. it's defintately of benefit if you want to wind up the boost a bit, or run a highflow, or R33 or R34 turbo etc.

Dush Mentor

Dush

Posted
Posted

I Had an ARC side mount cooler on my R33.. and i was running 14psi with no problem. tuned i was making 210kw@ wheels with only a Pod and cat back exhaust.

I sold it and upgreated to a front mound and bigger turbo... I sold My ARC for $500 on ebay.

Thats a Barging at that price, real cheap!

People with R32… U’d be stupid to miss out on something as good as this!

fEkuaR Experienced

fEkuaR

Posted
Posted (edited)

i made 210 rwkw on 10psi hi flowed turbo in my r33 with my arc sidemount. I have a front mount byt im keeping mine sitting in my shed and im planning on holding onto it for now. They are a great intercooler. If you are only after a 200rwkw car and want to keep unreal response this is the key.

Edited by fEkuaR
Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

yeah thanks for the input guys. $500 is on the money. I know I wont be selling mine cheaper than my current asking price. They cost well over $1000 new and perform so well for what they are. plus they keep potential defects away as to the untrained eye they look completely standard and sit in the standard location.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...