Jump to content
SAU Community

Recommended Posts

thanks for that.

Want to get a couple of quotes to see if its worth rebuilding r32 box or put in a r33 box.

- Patrick

not worth it just drop in the 33 box. s2 if possible.

HAHAHA ! HAAAA ! ! Try getting one ! ! well, they're out there: $1750 from the ONLY wreckers in Melbourne Who've got one, $1400->1700 privately, if You don't mind pot-luck . . . . (That's not a shot at anyone, just the nature of 2nd hand stuff)

Got a quote from All Wheel Drive Gearbox Reconditioners;

-------------------------------------------------

- Remove & Replace gearbox - $400

- Bearings and seals - $1200

Strip clean and inspect gearbox

Remove and replace bearings and seals

Re-assemble

Any Required parts (syncro etc) no labour incurred

Syncro's (if needed) are $500~ from Nissan, so looking at $2100 total?

-------------------------------------------------

Will drop by 360gearbox tomorrow and see what they have to say...

If i get a r33 gearbox for $1500, how much it cost to put into car driveaway?

$400 to remove/fit + extra's to make it actually work? ~ $2000 total?

Cheers

Patrick

Got a quote from All Wheel Drive Gearbox Reconditioners;

-------------------------------------------------

- Remove & Replace gearbox - $400

- Bearings and seals - $1200

Strip clean and inspect gearbox

Remove and replace bearings and seals

Re-assemble

Any Required parts (syncro etc) no labour incurred

Syncro's (if needed) are $500~ from Nissan, so looking at $2100 total?

-------------------------------------------------

Will drop by 360gearbox tomorrow and see what they have to say...

If i get a r33 gearbox for $1500, how much it cost to put into car driveaway?

$400 to remove/fit + extra's to make it actually work? ~ $2000 total?

Cheers

Patrick

$400 is too much just to remove & replace! $250 will cover it easy. Either that or they have no experience with skylines.

Thanks for the link wes81!

Interloper, they have a big sign on their workshop saying they specialize in GTR, WRX and all Japanese vehicles lol. Only saw 4WD's though..only went to them for a quote+free drive test. Might give them a miss as they didnt seem dedicated to japanese cars. I guess they needed to fill a blank wall on their workshop with some writing :happy:

HAHAHA ! HAAAA ! ! Try getting one ! ! well, they're out there: $1750 from the ONLY wreckers in Melbourne Who've got one, $1400->1700 privately, if You don't mind pot-luck . . . . (That's not a shot at anyone, just the nature of 2nd hand stuff)

not that hard if you know the right people, i picked up one for 1500

Interloper, they have a big sign on their workshop saying they specialize in GTR, WRX and all Japanese vehicles lol. Only saw 4WD's though..only went to them for a quote+free drive test. Might give them a miss as they didnt seem dedicated to japanese cars. I guess they needed to fill a blank wall on their workshop with some writing :)

lol, well there you go - instant cred with a sign like that :)

doesn't actually mean anything really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...