Jump to content
SAU Community

Recommended Posts

Hi,

i want put a bigger turbo or hi flow the stock one? Which is better as i dont wanna change internals but want my engine not to blow or fry a piston. What is the best turbo for minimal lag, most power and a good amount of power at the wheels with standard RB25DET.

thanks

JOHN

If you're after response and good average power across the rev range, then I'd recommend a highflow - good bang for buck and should easily see 220-250rwkw with the right supporting mods.

If you have enough coin and are after more power whilst still maintaining decent response, then the HKS GT2835 ProS is also a good choice.

pfc + 740cc injectors + z32 + HKS GT2835 PRO S

Isn't 740cc overkill for anything under 350rwkw? 550cc injectors should be more than adequate.

Depends on how much power your after mate? and whether or not you may want more power in the future again!

again it depends on your supporting mods as well. sooner or later your going to need to change ur fuel pump, injectors, clutch, ecu...etc...and all of which costs more money.

imo, i'd go a HIFLOW. the hiflowed turbo will give you the best of both worlds, more power than stock and pretty good response as well. and best bang for buck!

my two cents,

goodluck mate

i would recommend the gcg hiflow, i had one of them on my rb25, got a vg30 ehxaust housing adapted to it and results were very good, i was more than happy with it. made 258kw at wheels on 15psi, my engine is built however but still expect a signifigant gain over standard turbo.

I'd go for a GCG highflow turbo. Personally tried and tested. Close to stock spool time, but huge power. It's ball bearing.

Bolts striaght up. No modding lines etc. Includes everythign you need e.g. gaskets, washers, etc etc.

Cheap -- 1750.

The precision turbo highflows in the group buy section are also good - 1550. ball bearing too. I personally haven't tested them, but I know people who have, and i'd get one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...