Jump to content
SAU Community

Recommended Posts

Finally managed to take some pictures of my car. Got the car back resprayed in Sparkling Silver and for the money I payed I'm very happy. You really have to see the paint in person to see how 'sparkling' it is, I swear its as if theres glitter flakes in there. Anyhow some pictures, I really need to take the car to some better scenery.

Let me know what you guys think.

post-8121-1176217488.jpg

post-8121-1176217493.jpg

post-8121-1176217498.jpg

post-8121-1176217505.jpg

post-8121-1176217511.jpg

Edited by Andi

Cheers guys, appreciate the comments - its makes all the shit I've been through to get it like this well worth it. :happy:

siddr20 - yeah I got some higher res photos at 2048x1536 resolution. They're about ~550kb so if you're after some just PM me and I'll send some through.

ctjet - yep its what I thought at first, I really wanted the Impul skirts at first but I decided against it in the end; just thought it would have been too plain compared to my front bar. Really glad I chose these skirts instead, they might look dramatic in the photos but in person they're just perfect. :dry: The sidevents suit the vents in the front bar too hehe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...