Jump to content
SAU Community

Recommended Posts

hey guys.

my 96 r33 skyline is running like a dog, and has been ever since i bought it. now the problem is if i have it with over drive off ( so it kicks into 4th), when i take my food off accelerator fast, the car drops revs down down sounds like it is about to stall then bubbles and bubbles then kicks back upto normal and so on. I have replaced the intercooled and pipeing with a justjap cooler thinking it could be air leaking but didnt help at all...

Cars a auto too sorry

anyone got any ideas on why this happens?

Edited by matteh33
Link to comment
https://www.sau.com.au/forums/topic/164120-r33-gtst-runs-like-a-dog/
Share on other sites

I have exactly the same car as yours... I actually specifically wanted a turbo Auto as I'm fan of the 1/4 mile and like the way auto Skylines fly... damn fast... ok now... if you want to race in an auto... you have to do it the right way to maintain the revs at the higher RPMS...

This is what I do.... leave it on D - rev it all the way up to around 3,000 rpm's (with overdrive turned off)... then quickly kick it down to second gear... then you'll find that you'll maintain the car at the higher 4,000 - 5,000 RPM range quite well...

Also, there's a POWER button in the centre console...kick the down too... it should give you a bit of a kick in... I changed my fuel pump so being auto it reacts really well... damn fast... if you still expeience the sluggish performance... I'd bring it to a mechanic and get it checked out asap.

Good luck bro.

when i take my food off accelerator fast, the car drops revs down down

you're still grappling with the "pickle matrix"

try keeping the food off the accelerator completely... :D

air flow meter?

I second that. it can be cleaned by removing it and running some metho or other non-residual contact cleaner over the little wires that hang down inside it (but dont touch these contacts with your fingers or anything). The metho will clean it up, then just leave it to dry for about 30 mins (metho dries very quickly) and you can safely put it back on the car and you're good to go.

if you like you can also tip a tiny bit onto the actual contacts where the plug connects to it on the side...just to make sure the plug has a good contact.

its a quick and easy check so i'd do that first.

otherwise i guess check plugs/coils etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...