Jump to content
SAU Community

Recommended Posts

Ok i recently blew my little rb20 in my r32 but now im working on a rebuild for it

my car produced 238.8 rwkw @ 19psi before i cracked a cylinder and blew a piston ring

the car already had low compression so i knew it was coming The internals are stock.

i decided to rebuild the 20 instead of dropping in an rb25 because there is too many legal issues

With changing it over..

MY MODS

GT30 turbo 450hp

High mount stainless manifold

660cc denso injectors

3inch exhaust turbo back to hi flow cat

hybrid Front mount intercooler

fuel pump

K+N filter

external waste gate to screamer pipe

greddy electoric boost controler

i am going to strengthen the internals just so i can reliably run 20 - 22 psi

Im not sure what internals i should change and what to use i dont wanna spend over $6000

on the rebuild unless i have to

im getting forged pistons what else do i need?

also wanna try and get a little more down low torque as everybody knows how laggy my setup

is with the rb20 is there any other mods i can do to the engine while its all opened up?

someone said flowing heads? or plenum? i dont even know what these are?

what do you guys recon id like to do mods that you cant see just to be safe from cops

even now its already obvious but easy to change back to stock

Sorry for the long thread but id like help before i go see my mechanic and he tells me that ive gotta spend $10,000 to get what i want if you know what i mean...

Cheers Antz...

Why not get an RB25 or RB26 crank/rods and stroke it baby, more torque and the cops won"t pick it. You also have a full reco engine, not a second hand 100,000 km RB26 time bomb!

Just my 2c worth

There is still hope regarding that bottom end. Still chasing to see if its in the back of the workshop. But realistically...its too much money to build your RB20. For $600 you can get a wrecker RB20 with warranty. I have used a wrecker SR20 (was a great engine) and my current wrecker RB20 that is makign more power then yours and i dare say i drive mine harder then most owners...and mine is in perfect health.

The trick is to get the thing tuned by a person that knows what they are doing. (Thats not to say your tuner doesnt)

thats all good but if i drop in any other engine other than the rb20 and i get epa'ed im screwed

Aren't i ????

how far do they look into it if i do get epa'ed?

you cant just put anything in it and hope that you dont get done for it.

my head is done in............................. i just wanna drive my skyline again

thats all good but if i drop in any other engine other than the rb20 and i get epa'ed im screwed

Aren't i ????

how far do they look into it if i do get epa'ed?

Basically... if they catch you... your f**ked to put it bluntly :)

There is no way around it if you wanna be "legal-ish"

If you want power upto 260rwkw, its RB25.

If you want more than that, its RB26 if you ask me.

RB25 limit is 260rwkw because after that, your outta options using the stock size turbo, and i was pinned for a GT30 on RB25 :thumbsup:

RB26 is the the only way if you want to avoid hassles/fines etc over 260rwkw. I've been there, hence i just went RB26.

When you do the costings up of a potential EPA, and what its costs to go back to stock... its simply not worth it and its MORE than the cost of an RB26 conversion

ok thats what i wanna know. i will port the head then and put cams in.

Maybe NOS next time i blow it up what you recon?

anyway boys thanks for the help ive decided what im doing i will let you's all know when its done.

hopefully have a reliable 250rwkw with not too much hassle from cops

cheers

nos is probably the eaiest way to get more power and response

legality issues of it? yeah cos exteranl gate, screamer, aftermarket ecu, bigger turbo etc are all legal modifications

nos is probably the eaiest way to get more power and response

legality issues of it? yeah cos exteranl gate, screamer, aftermarket ecu, bigger turbo etc are all legal modifications

Im not suggesting that these other modifications are legal. But the risks involved with nitrous would far outway the risks involved with an aftermarket ECU.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is anyone running these axles? R32, R33, R34 GTR front Axles. shafts itself rated 950hp. Suit all RB26 engines Croydon, Melbourne, Victoria Would be nice to pay half the cost of Driveshaft Shop Axles. I'm building an AWD S13 Coupe that is very low ride height (high cv angle) compared to stock R32. Has an RB30 with appx 600whp. Just looking for feedback. Thanks, Josh- https://www.instagram.com/feng_shui_garage/
    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
×
×
  • Create New...