Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

for humour

ecu $1500 tuned

turbos $3000 fitted

tyres $1000

clutch $1200

strip interior $1000

no exhaust $1000

fuel upgrade $1000

cold air / intake setup $500

nos kit $600

4wd upgrade $800

afm upgrade $800

4wd controller $350

it will fail on stock internals

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

Turbos 2860-5 - $2500

ECU - $1000

Injectors - $700

AFM - $600

Fuel pump - $200

Exhaust - $700

Clutch - $1200

6900. Thats not including anything else you'll need to replace along the way.

Or the tyres you need to race on

For 5k, i say it cant be done. Even if you used 2nd hand parts. Its still out of reach

You dont need NOS to run a 10.99

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hope the stock clutch holds up LOL!

yes ok, i forgot about the fuel.

but assuming you scored the gear cheap secondhand, chinese turbos no intake filtration etc, dodgy hack togeather plumbing, decent wet nos can had for under $400 second hand yeah? surely a clutch to hold it could be had for 1k ay? and all this only has to hold togeather for a short time... how many kw is needed to get in to 10`s?

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hold the stock clutch holds up LOL!

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

rofl he never said it was ment to last :)

ps i know its not possible im just throwing wild ideas up in the air LOL! how much pressure can the stock fuel line hold?

sure it would be fun to try but it wont happen

and an xr6t i dont think could get into 10s under 5k

they apss kits to get 10sec are like 20k

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

exactly, and forget the xr6t, the cars that go into the 10`s have alot of money spent... but still on the stock gt3540 with ported wastegate mind you...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...